Bitumen and solids
Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
Paving grade bitumen is a black, sticky binder graded by how deep a standard needle sinks into it. In the EN 12591 range the grades run from 35/50 (hardest) to 160/220 (softest), and other standards also use grades such as 60/70 and 80/100.
← 全部产品又称: Penetration grade bitumen, Asphalt cement, Bitumen 60/70, Bitumen 80/100, Bitumen 40/50, Asphalt binder
- 闪点Above about 230 C (Cleveland open cup) for most grades
- 密度1000 to 1060 kg/m³
- 黏度Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
- 硫1 to 6% depending on crude
- 危险性UN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)


图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.
搅动液体,感受它有多稠
用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。
半固体 常温下为半固体。只会缓慢蠕动,需加热才能泵送。
数据中的典型粘度Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
- 搅动速度
- 0 像素/秒
- 液体运动
- 0%
- 静止所需时间
- -
- 表面
- 静止
该等级仅供手感参考。所示粘度数值以规格数据为准。
外观
Black, glossy at hot, brittle when cold
应用领域
- Road paving
- Airport runways
- Roofing and waterproofing
- Hot-mix asphalt in ports and car parks
装卸与安全
- Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
- Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
典型性质
- 外观
- Black, glossy at hot, brittle when cold
- 15 °C 密度
- 1000 to 1060 kg/m³
- 闪点
- Above about 230 C (Cleveland open cup) for most grades
- 黏度
- Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
- 倾点
- Not applicable
- 典型含硫量
- 1 to 6% depending on crude
◉What it is
Bitumen is the heavy residue of crude distillation. Wikipedia describes it as the heavy fraction boiling above about 500 C after vacuum distillation. Paving grades are defined by penetration at 25 C in tenths of a millimetre: 40/50 means 40 to 50 units. Hard grades such as 40/50 resist rutting in hot climates and heavy traffic, while softer grades like 80/100 resist cracking in cold climates. It is stored and moved at about 150 C.
⬡What it is made of
C40+ asphaltenes, resins, saturates and aromatics; sulphur 1 to 6%.
⚛化学成分
Bitumen is a colloidal system: asphaltene clusters dispersed in an oily maltene phase of resins, aromatics and saturates. The ratio decides stiffness. More asphaltenes make a harder bitumen.
⚙How it is made
Vacuum distillation residue from suitable crude oils (such as heavy Middle East crudes) is the base. Air blowing or blending of hard and soft components adjusts penetration.
▶How it works
Penetration (ASTM D5, EN 1426), softening point (ASTM D36, EN 1427) and viscosity are used to measure stiffness. It binds aggregate in asphalt concrete, becoming fluid at 150 C and solid at ambient temperature.
▣Storage, loading and inspection
Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
★Why it matters in the Gulf
The GCC consumes large volumes of bitumen in road and airport projects, and Gulf and Iranian bitumen is traded to Central Asia and East Africa. Refinery-by-refinery supply and export volumes are not stated.
主要分子
标准与规格
| EN 12591 | European specification for paving grade bitumens (penetration grades). |
|---|---|
| ASTM D946 | US penetration-graded asphalt cement. |
| ASTM D3381 | Viscosity-graded asphalt cement. |
| AASHTO M 320 | Performance-graded asphalt binder. |
危害
Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
交易方式
Units
Metric tonnes
Benchmarks
Contract-based; price tracks crude oil and fuel oil; no futures
Typical cargo
Bulk bitumen vessels 3,000 to 20,000 mt; ISO tanks; drums
Incoterms
FOB, CFR, CIF bulk; ISO tank FCA
Notes
Penetration grades such as 60/70 are common export trade grades. Origin and volume data are not stated.
可生产此产品的炼厂:我们的推荐
已收录 54 家炼厂生产此产品,其中 17 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversion导出权限
- 2Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperating导出权限
- 3Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
- 4Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 5Karbala Refinery
Iraq · 140,000 bpdGulf locationOperating
- 6Riyadh Refinery
Saudi Arabia · 126,000 bpdGulf locationOperatingDeep conversion
可处理该产品的码头
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
你知道吗
💡 In American usage asphalt means bitumen, and asphalt concrete is the paving mix with stone (Wikipedia).
💡 Natural bitumen from the Dead Sea was used by the Egyptians for embalming (Wikipedia).
测验您对 Bitumen 40/50, 60/70 and 80/100 (Paving Grades) 的掌握
What does 60/70 mean?
该组更多内容
- Polymer Modified Bitumen (PMB)
- Cutback Bitumen
- Bitumen Emulsion
- Oxidised Bitumen (Blown Bitumen)
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
来源
由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。






