Light distillates
Heavy naphtha
Heavy naphtha is the C7 to C12 cut above light naphtha, rich in naphthenes and aromatic precursors. It is the main feed for catalytic reformers.
← All productsAlso called: HSR, Heavy straight-run naphtha, Reformer feed naphtha
- Flash pointRoughly 20 to 40 C (varies)
- Density720 to 770 kg/m³
- SulphurReduced to below 1 ppm before reforming
- Boiling range90 to 200 °C
- HazardUN1268, Class 3, packing group II or III


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Very thin Water-thin or thinner. Ripples run fast and ring for a long time.
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Colourless to pale liquid
Where it is used
- Catalytic reformer feed
- Aromatics complex feed
- Cracker feed
- Solvent
Handling and safety
- Stored in floating roof tanks; sampling per ASTM D4057.
- Flammable liquid; vapours heavier than air.
Typical properties
- Appearance
- Colourless to pale liquid
- Density at 15 °C
- 720 to 770 kg/m³
- Boiling range
- 90 to 200 °C
- Flash point
- Roughly 20 to 40 C (varies)
- Viscosity
- Low
- Pour point
- Not applicable
- Typical sulphur
- Reduced to below 1 ppm before reforming
◉What it is
Heavy naphtha comes from the atmospheric crude unit or a condensate splitter at a higher boiling range than light naphtha. It contains molecules with more carbon atoms, including cyclic naphthenes that can be converted into aromatics. In a refinery it is hydrotreated to remove sulphur and then sent to a catalytic reformer to raise its octane. Petrochemical plants may also use it as cracker or aromatics feed. It is flammable but less volatile than light naphtha.
⬡What it is made of
C7 to C12 paraffins, naphthenes and aromatics, boiling about 90 to 200 C per one reference.
⚛The chemistry
Naphthenes such as methylcyclohexane (C7H14) can be dehydrogenated to toluene (C7H8) in the reformer, which raises octane. Sulphur compounds poison reforming catalyst, so they are removed first by hydrotreating.
⚙How it is made
Atmospheric distillation of crude or condensate, followed by hydrotreating.
▶How it works
Heavy naphtha is converted in a catalytic reformer to reformate, a high-octane blend component, and to hydrogen.
▣Storage, loading and inspection
Stored in floating roof tanks; sampling per ASTM D4057.
★Why it matters in the Gulf
Gulf refineries in Kuwait, Saudi Arabia and the UAE produce heavy naphtha for their own reformers and export surplus to Asia. Verified volumes were not retrieved.
Key molecules
Standards and specifications
| ASTM D86 | Distillation. |
|---|---|
| ASTM D4052 | Density. |
Hazards
Flammable liquid; vapours heavier than air.
How it is traded
Units
Metric tonnes
Benchmarks
Platts naphtha assessments
Typical cargo
MR or LR tankers
Incoterms
FOB, CFR
Notes
Contracts specify paraffin, naphthene and aromatic (PONA) content and sulphur.
Refineries that make it: our suggestions
54 listed refineries make this product, 24 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 5Bapco Sitra Refinery
Bahrain · 380,000 bpdGulf locationOperatingExport access
- 6Laffan Refinery
Qatar · 306,600 bpdGulf locationOperatingExport access
Terminals that handle it
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
- Fujairah Oil Terminal (FOT)
United Arab Emirates
Did you know
💡 Reforming makes hydrogen as a by-product.
💡 Heavy naphtha boils roughly 90 to 200 C (Wikipedia).
Test yourself on Heavy naphtha
Heavy naphtha is mainly fed to:
More in this group
- Light naphtha
- Gasoline RON 91
- Gasoline RON 95
- Gasoline RON 98
- Reformate
- Alkylate
- Pyrolysis gasoline
- Aviation gasoline
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.








