Skip to content

Marine & heavy · ISO 8217 residual grades with sulphur up to 3.50%. 2017 edition limits shown; check the edition in your contract

HSFO 3.5%

High sulphur fuel oil. It is legal for ships fitted with exhaust gas scrubbers, and it is also used for power and industry. Quality limits are the same as other residual fuels, with the sulphur limit set by regulation and the contract.

Request HSFO 3.5%
  • 9Parameters
  • 9With a limit
  • 9Off-spec causes explained
  • Flash pointmin 60 °C
  • Densitymax 991 kg/m³
  • Viscositymax 380 mm²/s
  • Sulphurmax 3.5 % m/m
Typical colour, laboratory glass
Laboratory glass sample of HSFO 3.5%, in its typical colour
A sample of HSFO 3.5% in laboratory glass on a dark studio background, so the colour is easy to judge.
Reference photograph
How HSFO 3.5% is stored and moved in practice.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.

Stir the liquid to feel how thick it is

Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.

Very thick
Colour follows the typical colour of HSFO 3.5%.
Thin and looseThick and heavy

Very thick Very heavy. It barely moves and flows back slowly.

Typical viscosity from the dataViscosity at 50 °C (RMG 380): max 380 mm²/s

Stir speed
0 px/s
Liquid movement
0%
Settled after
-
Surface
Still

The class is a guide for feel. The viscosity figure shown is the one in the specification data.

How it looks

Black, opaque and very viscous. It must be heated to flow. As with all residual fuels, colour says nothing about quality.

Where it is used

  • Ships with scrubbers
  • Power plants and industrial boilers
  • Refinery and blending stock

Handling and safety

  • Heated storage and lines.
  • Test at delivery and keep a retained sample.
  • Sulphur must match the vessel's legal route.

Typical properties

Sulphur
max 3.5 % m/m
Viscosity at 50 °C (RMG 380)
max 380 mm²/s
Density at 15 °C
max 991 kg/m³
CCAI
max 870
Flash point
min 60 °C
Total sediment, aged
max 0.1 % m/m
Water
max 0.5 % vol
Vanadium
max 350 mg/kg

The specification

ISO 8217 residual grades with sulphur up to 3.50%. 2017 edition limits shown; check the edition in your contract. Limits are the commonly published ones. Your contract and the current edition of the standard decide.

ParameterLimitTest methodWhat it protects
Sulphurmax 3.5 % m/mISO 8754The contract and the regulation for the vessel set the limit. 3.50% is the usual commercial maximum.
Viscosity at 50 °C (RMG 380)max 380 mm²/sISO 3104Pumping and atomising at the heater.
Density at 15 °Cmax 991 kg/m³ISO 3675Purifier limit.
CCAImax 870 ISO 8217 Annex FIgnition quality.
Flash pointmin 60 °CISO 2719Safety.
Total sediment, agedmax 0.1 % m/mISO 10307-2Stability.
Watermax 0.5 % volISO 3733Purifier and corrosion.
Vanadiummax 350 mg/kgISO 14597Hot corrosion.
Aluminium plus siliconmax 60 mg/kgISO 10478Abrasive wear.

Why a cargo goes off spec

When one parameter fails, it usually points to one cause. Here is what to look for.

Sulphurmax 3.5 % m/m

Too highA sour residue not blended down.

Why it mattersThe contract and the regulation for the vessel set the limit. 3.50% is the usual commercial maximum.

Viscosity at 50 °C (RMG 380)max 380 mm²/s

Too highToo much residue.

Why it mattersPumping and atomising at the heater.

Density at 15 °Cmax 991 kg/m³

Too highAromatic or heavy cutter stock.

Why it mattersPurifier limit.

CCAImax 870

Too highAromatic cutter stock.

Why it mattersIgnition quality.

Flash pointmin 60 °C

Too lowLight product contamination.

Why it mattersSafety.

Total sediment, agedmax 0.1 % m/m

Too highIncompatible blend components.

Why it mattersStability.

Watermax 0.5 % vol

Too highPoor settling or a leak.

Why it mattersPurifier and corrosion.

Vanadiummax 350 mg/kg

Too highVanadium-rich residue.

Why it mattersHot corrosion.

Aluminium plus siliconmax 60 mg/kg

Too highSlurry oil in the blend.

Why it mattersAbrasive wear.

Check your own certificate

Type the values, paste the certificate text, or upload a PDF or photo. The checker names every parameter that is off spec and the usual reason.

or paste the certificate text
ParameterLimitYour valueResult
SulphurISO 8754max 3.5 % m/menter a value
Viscosity at 50 °C (RMG 380)ISO 3104max 380 mm²/senter a value
Density at 15 °CISO 3675max 991 kg/m³enter a value
CCAIISO 8217 Annex Fmax 870 enter a value
Flash pointISO 2719min 60 °Center a value
Total sediment, agedISO 10307-2max 0.1 % m/menter a value
WaterISO 3733max 0.5 % volenter a value
VanadiumISO 14597max 350 mg/kgenter a value
Aluminium plus siliconISO 10478max 60 mg/kgenter a value

Sources

Indicative information for professional users. Not a substitute for the standard, a contract or an independent inspector.