Bitumen and solids
Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
Paving grade bitumen is a black, sticky binder graded by how deep a standard needle sinks into it. In the EN 12591 range the grades run from 35/50 (hardest) to 160/220 (softest), and other standards also use grades such as 60/70 and 80/100.
← सभी उत्पादअन्य नाम: Penetration grade bitumen, Asphalt cement, Bitumen 60/70, Bitumen 80/100, Bitumen 40/50, Asphalt binder
- फ़्लैश पॉइंटAbove about 230 C (Cleveland open cup) for most grades
- घनत्व1000 to 1060 kg/m³
- विस्कॉसिटीGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
- सल्फर1 to 6% depending on crude
- खतराUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)


चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.
तरल को हिलाकर उसका गाढ़ापन महसूस करें
माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।
अर्ध-ठोस सामान्य तापमान पर अर्ध-ठोस। यह केवल धीरे-धीरे सरकता है और पंप करने के लिए गर्म करना पड़ता है।
डेटा से सामान्य श्यानताGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
- हिलाने की गति
- 0 px/s
- तरल की गति
- 0%
- शांत होने में लगा समय
- -
- सतह
- स्थिर
यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।
यह कैसा दिखता है
Black, glossy at hot, brittle when cold
इसका उपयोग कहाँ होता है
- Road paving
- Airport runways
- Roofing and waterproofing
- Hot-mix asphalt in ports and car parks
हैंडलिंग और सुरक्षा
- Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
- Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
सामान्य गुण
- रूप-रंग
- Black, glossy at hot, brittle when cold
- 15 °C पर डेंसिटी
- 1000 to 1060 kg/m³
- फ़्लैश पॉइंट
- Above about 230 C (Cleveland open cup) for most grades
- विस्कॉसिटी
- Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
- पोर पॉइंट
- Not applicable
- सामान्य सल्फ़र
- 1 to 6% depending on crude
◉What it is
Bitumen is the heavy residue of crude distillation. Wikipedia describes it as the heavy fraction boiling above about 500 C after vacuum distillation. Paving grades are defined by penetration at 25 C in tenths of a millimetre: 40/50 means 40 to 50 units. Hard grades such as 40/50 resist rutting in hot climates and heavy traffic, while softer grades like 80/100 resist cracking in cold climates. It is stored and moved at about 150 C.
⬡What it is made of
C40+ asphaltenes, resins, saturates and aromatics; sulphur 1 to 6%.
⚛रसायन विज्ञान
Bitumen is a colloidal system: asphaltene clusters dispersed in an oily maltene phase of resins, aromatics and saturates. The ratio decides stiffness. More asphaltenes make a harder bitumen.
⚙How it is made
Vacuum distillation residue from suitable crude oils (such as heavy Middle East crudes) is the base. Air blowing or blending of hard and soft components adjusts penetration.
▶How it works
Penetration (ASTM D5, EN 1426), softening point (ASTM D36, EN 1427) and viscosity are used to measure stiffness. It binds aggregate in asphalt concrete, becoming fluid at 150 C and solid at ambient temperature.
▣Storage, loading and inspection
Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
★Why it matters in the Gulf
The GCC consumes large volumes of bitumen in road and airport projects, and Gulf and Iranian bitumen is traded to Central Asia and East Africa. Refinery-by-refinery supply and export volumes are not stated.
मुख्य अणु
मानक और स्पेसिफिकेशन
| EN 12591 | European specification for paving grade bitumens (penetration grades). |
|---|---|
| ASTM D946 | US penetration-graded asphalt cement. |
| ASTM D3381 | Viscosity-graded asphalt cement. |
| AASHTO M 320 | Performance-graded asphalt binder. |
ख़तरे
Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
इसका व्यापार कैसे होता है
Units
Metric tonnes
Benchmarks
Contract-based; price tracks crude oil and fuel oil; no futures
Typical cargo
Bulk bitumen vessels 3,000 to 20,000 mt; ISO tanks; drums
Incoterms
FOB, CFR, CIF bulk; ISO tank FCA
Notes
Penetration grades such as 60/70 are common export trade grades. Origin and volume data are not stated.
इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव
54 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 17 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 2Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 3Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
- 4Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 5Karbala Refinery
Iraq · 140,000 bpdGulf locationOperating
- 6Riyadh Refinery
Saudi Arabia · 126,000 bpdGulf locationOperatingDeep conversion
इसे संभालने वाले टर्मिनल
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
क्या आप जानते हैं
💡 In American usage asphalt means bitumen, and asphalt concrete is the paving mix with stone (Wikipedia).
💡 Natural bitumen from the Dead Sea was used by the Egyptians for embalming (Wikipedia).
Bitumen 40/50, 60/70 and 80/100 (Paving Grades) पर ख़ुद को परखें
What does 60/70 mean?
इस समूह में और
- Polymer Modified Bitumen (PMB)
- Cutback Bitumen
- Bitumen Emulsion
- Oxidised Bitumen (Blown Bitumen)
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
स्रोत
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।






