सामग्री पर जाएँ

Bitumen and solids

Polymer Modified Bitumen (PMB)

PMB is bitumen blended with polymers such as SBS to improve elasticity and temperature performance. It is used on heavy traffic roads and in roofing membranes.

← सभी उत्पादअन्य नाम: PMB, SBS modified bitumen, PG 76-22, Modified binder

  • फ़्लैश पॉइंटTypically above 220 C (varies by grade)
  • घनत्व1000 to 1040 kg/m³
  • विस्कॉसिटीSoftening point at least 65 C for the PMB 45/80-65 grade
  • सल्फर1 to 6%
  • खतराUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
सामान्य रंग, प्रयोगशाला काँच
Polymer Modified Bitumen (PMB) का प्रयोगशाला काँच नमूना, उसके सामान्य रंग में
गहरे स्टूडियो बैकग्राउंड पर प्रयोगशाला के काँच में Polymer Modified Bitumen (PMB) का नमूना, ताकि रंग आसानी से परखा जा सके।
संदर्भ तस्वीर
व्यवहार में Polymer Modified Bitumen (PMB) का भंडारण और परिवहन कैसे होता है।

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.

Polymer Modified Bitumen (PMB) सामान्य तापमान पर ठोस है, इसलिए हिलाने के लिए कोई तरल नहीं है। Softening point at least 65 C for the PMB 45/80-65 grade

यह कैसा दिखता है

Black

इसका उपयोग कहाँ होता है

  • Heavy traffic roads
  • Airports
  • Bridge decks
  • Roofing membranes

हैंडलिंग और सुरक्षा

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

सामान्य गुण

रूप-रंग
Black
15 °C पर डेंसिटी
1000 to 1040 kg/m³
फ़्लैश पॉइंट
Typically above 220 C (varies by grade)
विस्कॉसिटी
Softening point at least 65 C for the PMB 45/80-65 grade
पोर पॉइंट
Not applicable
सामान्य सल्फ़र
1 to 6%

◉What it is

Polymer modified bitumen is conventional bitumen that has been blended with polymers. The most common is SBS (styrene-butadiene-styrene), which adds elasticity and resistance to rutting and cracking. Others are plastomers such as EVA and recycled rubber (Wikipedia mentions tyre rubber). PMB is graded by softening point, elastic recovery and penetration. It costs more than plain bitumen but extends pavement life.

⬡What it is made of

Bitumen plus 2 to 7% polymer; sometimes cross-linking agent such as sulphur.

⚛रसायन विज्ञान

SBS has hard polystyrene end blocks and soft polybutadiene mid blocks. In bitumen the blocks form a network that gives rubber-like elasticity.

⚙How it is made

Base bitumen is mixed with polymer in high shear mills at 170 to 190 C, then held for swelling.

▶How it works

The polymer network lets the binder stretch and recover, so pavement resists rutting in summer and cracking in winter.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.

★Why it matters in the Gulf

PMB is relevant for Gulf highways and airports where summer pavement temperatures are very high. Regional plant details are not stated.

मुख्य अणु

मानक और स्पेसिफिकेशन

EN 14023European framework specification for polymer modified bitumens.
AASHTO M 320 and M 332Performance-graded binder specifications, M 332 using the multiple stress creep recovery test.
ASTM D6373Performance-graded asphalt binder.

ख़तरे

UN3257 for hot bitumen shipped as an elevated temperature liquidक्लास Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

इसका व्यापार कैसे होता है

Units

Metric tonnes

Benchmarks

Contract price; premium over 60/70

Typical cargo

Tank truck, ISO tank, drums

Incoterms

DAP, FCA, FOB

Notes

Priced at a premium over plain bitumen; the premium varies by market.

इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव

73 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 22 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।

नक़्शे पर सभी 73 देखें

इसे संभालने वाले टर्मिनल

क्या आप जानते हैं

💡 SBS is the polymer most often used to modify bitumen.

💡 Polymer modification raises elasticity and resistance to rutting.

Polymer Modified Bitumen (PMB) पर ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

Common polymer in PMB?

इस समूह में और

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।