Bitumen and solids
Oxidised Bitumen (Blown Bitumen)
Oxidised bitumen is made by blowing air through hot bitumen. It is harder and less temperature-sensitive than paving bitumen.
← सभी उत्पादअन्य नाम: Blown bitumen, Industrial bitumen, 85/25, 115/15, Roofing bitumen
- फ़्लैश पॉइंटTypically above 240 C (varies by grade)
- घनत्व1020 to 1060 kg/m³
- विस्कॉसिटीSoftening point 85 to 115 C
- सल्फर1 to 4%
- खतराUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)


चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.
तरल को हिलाकर उसका गाढ़ापन महसूस करें
माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।
अर्ध-ठोस सामान्य तापमान पर अर्ध-ठोस। यह केवल धीरे-धीरे सरकता है और पंप करने के लिए गर्म करना पड़ता है।
डेटा से सामान्य श्यानताSoftening point 85 to 115 C
- हिलाने की गति
- 0 px/s
- तरल की गति
- 0%
- शांत होने में लगा समय
- -
- सतह
- स्थिर
यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।
यह कैसा दिखता है
Black, hard
इसका उपयोग कहाँ होता है
- Roofing
- Waterproofing
- Pipe coating
- Sealants
हैंडलिंग और सुरक्षा
- Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
- Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
सामान्य गुण
- रूप-रंग
- Black, hard
- 15 °C पर डेंसिटी
- 1020 to 1060 kg/m³
- फ़्लैश पॉइंट
- Typically above 240 C (varies by grade)
- विस्कॉसिटी
- Softening point 85 to 115 C
- पोर पॉइंट
- Not applicable
- सामान्य सल्फ़र
- 1 to 4%
◉What it is
Blown bitumen is partly oxidised with air at high temperature after distillation, making it harder (Wikipedia). Grades such as 85/25 and 115/15 are named by softening point and penetration. It is used for roofing felts, waterproofing, pipe coating, and as a sealant. It is less suitable for roads because it is brittle at low temperature.
⬡What it is made of
Asphaltene-rich bitumen.
⚛रसायन विज्ञान
Oxygen causes dehydrogenation and linking of molecules, raising asphaltene content and softening point.
⚙How it is made
Bitumen is heated to 230 to 280 C in a blowing tower and air is bubbled through for hours.
▶How it works
Lower penetration and higher softening point give resistance to flow at high temperature.
▣Storage, loading and inspection
Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
★Why it matters in the Gulf
Oxidised grades are used for roofing and pipe coating. Gulf production and export details are not stated.
मुख्य अणु
मानक और स्पेसिफिकेशन
| EN 13304 | European framework specification for oxidised bitumens. |
|---|---|
| ASTM D312 | Asphalt used in roofing. |
| IS 702 | Indian standard for industrial bitumen. |
ख़तरे
Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
इसका व्यापार कैसे होता है
Units
Metric tonnes; bags; drums
Benchmarks
Contract
Typical cargo
Drums, bags, bulk
Incoterms
FOB, CIF
Notes
Specialty.
इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव
54 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 17 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 2Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 3Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
- 4Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 5Karbala Refinery
Iraq · 140,000 bpdGulf locationOperating
- 6Riyadh Refinery
Saudi Arabia · 126,000 bpdGulf locationOperatingDeep conversion
इसे संभालने वाले टर्मिनल
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
क्या आप जानते हैं
💡 Blown bitumen is partly oxidised with air at high temperature, which makes it harder (Wikipedia).
💡 Roofing membranes rely on it.
Oxidised Bitumen (Blown Bitumen) पर ख़ुद को परखें
How is oxidised bitumen made?
इस समूह में और
- Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
- Polymer Modified Bitumen (PMB)
- Cutback Bitumen
- Bitumen Emulsion
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
स्रोत
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।






