Bitumen and solids
Cutback Bitumen
Cutback bitumen is bitumen thinned with a petroleum solvent so it can be applied cold. The solvent evaporates and leaves the hard bitumen.
← सभी उत्पादअन्य नाम: Cut-back bitumen, RC, MC, SC cutbacks, Road oil, Rapid curing cutback
- घनत्व920 to 1000 kg/m³
- सल्फर1 to 4%
- खतराUN1999, Class 3 flammable liquid (tars, liquid, including road oils and cutback bitumens)


चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.
तरल को हिलाकर उसका गाढ़ापन महसूस करें
माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।
गाढ़ा भारी। यह हिलाने का विरोध करता है और केवल धीरे-धीरे चलता है।
- हिलाने की गति
- 0 px/s
- तरल की गति
- 0%
- शांत होने में लगा समय
- -
- सतह
- स्थिर
यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।
यह कैसा दिखता है
Dark brown to black liquid
इसका उपयोग कहाँ होता है
- Prime coat on granular base
- Tack coat
- Cold mix patching
हैंडलिंग और सुरक्षा
- Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.
- Flammable vapour; keep away from ignition.
सामान्य गुण
- रूप-रंग
- Dark brown to black liquid
- 15 °C पर डेंसिटी
- 920 to 1000 kg/m³
- विस्कॉसिटी
- Measured by Saybolt Furol or Engler viscosity
- पोर पॉइंट
- Not applicable
- सामान्य सल्फ़र
- 1 to 4%
◉What it is
Cutback bitumen is made by dissolving bitumen in a volatile solvent such as naphtha, kerosene or diesel. The solvent type decides the curing speed: rapid curing (RC) uses naphtha, medium curing (MC) uses kerosene and slow curing (SC) uses gasoil. It is used for tack coats, prime coats and cold patching. Cutbacks emit volatile organic compounds, so many countries have shifted to emulsions.
⬡What it is made of
Bitumen 60 to 80% plus solvent 20 to 40%.
⚛रसायन विज्ञान
Solvent molecules lower the viscosity by breaking asphaltene clusters. After spraying, the solvent evaporates and the bitumen hardens.
⚙How it is made
Hot bitumen is blended with solvent at 100 to 140 C in tanks.
▶How it works
Applied by spray at 20 to 80 C, the solvent evaporates (cure) over minutes (RC) to days (SC).
▣Storage, loading and inspection
Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.
★Why it matters in the Gulf
Cutbacks are used in road works for prime coats, and VOC rules push use toward emulsions. Regional volumes are not stated.
मुख्य अणु
मानक और स्पेसिफिकेशन
| ASTM D2028 | Rapid curing cutback |
|---|---|
| ASTM D2027 | Medium curing cutback |
| ASTM D2026 | Slow curing cutback |
| IS 217 | India cutback bitumen |
ख़तरे
Flammable vapour; keep away from ignition.
इसका व्यापार कैसे होता है
Units
Metric tonnes; drums
Benchmarks
Contract
Typical cargo
Bulk or drums
Incoterms
FOB, DAP
Notes
Trade is smaller than for bitumen.
इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव
54 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 17 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 2Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 3Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
- 4Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 5Karbala Refinery
Iraq · 140,000 bpdGulf locationOperating
- 6Riyadh Refinery
Saudi Arabia · 126,000 bpdGulf locationOperatingDeep conversion
इसे संभालने वाले टर्मिनल
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
क्या आप जानते हैं
💡 Cutback production is decreasing because solvents evaporate as VOCs.
💡 Bitumen is sometimes mixed with diesel oil or kerosene before shipping (Wikipedia).
Cutback Bitumen पर ख़ुद को परखें
What is cutback bitumen?
इस समूह में और
- Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
- Polymer Modified Bitumen (PMB)
- Bitumen Emulsion
- Oxidised Bitumen (Blown Bitumen)
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
स्रोत
- Bitumen (Wikipedia)
- List of UN numbers 3201 to 3300 (Wikipedia)
- List of UN numbers 1901 to 2000 (Wikipedia)
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।






