Heavy fuels
IFO 380 and IFO 180
IFO 380 and IFO 180 are intermediate fuel oils named for their maximum viscosity in mm2/s at 50 C. They are blends of residual oil with some distillate.
← Todos os produtosTambém chamado de: Intermediate Fuel Oil 380, Intermediate Fuel Oil 180, RMG 380, RME 180, IFO
- Ponto de fulgorMin 60 C
- Densidade960 to 991 kg/m³
- ViscosidadeMax 180 or 380 mm2/s at 50 C
- Fluidez a frioMax 30 C
- EnxofreDepends on type: HS up to 3.5%; VLS up to 0.50%
- PerigoUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0.
Agite o líquido para sentir a sua espessura
Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.
Muito espesso Muito pesado. Quase não se move e volta a escorrer lentamente.
Viscosidade típica segundo os dadosMax 180 or 380 mm2/s at 50 C
- Velocidade de agitação
- 0 px/s
- Movimento do líquido
- 0%
- Assentou após
- -
- Superfície
- Parado
A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.
Aspecto esperado
Black, viscous
Onde é usado
- Ships with slow and medium speed diesel engines
- Power stations
Manuseamento e segurança
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Propriedades típicas
- Aparência
- Black, viscous
- Densidade a 15 °C
- 960 to 991 kg/m³
- Ponto de fulgor
- Min 60 C
- Viscosidade
- Max 180 or 380 mm2/s at 50 C
- Ponto de fluidez
- Max 30 C
- Enxofre típico
- Depends on type: HS up to 3.5%; VLS up to 0.50%
◉What it is
Intermediate fuel oil is a marine residual fuel blend. The numbers refer to viscosity in centistokes at 50 C: 380 or 180. According to Wikipedia, IFO 380 is about 98 percent residual oil with 2 percent distillate, while IFO 180 is about 88 percent residual and 12 percent distillate. In ISO 8217 terms IFO 380 corresponds to RMG 380 and IFO 180 to RME 180. They were the main ship fuels before IMO 2020 and are still sold in high and low sulphur forms.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛A química
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
Vacuum residue or visbreaker residue is diluted with cutter stock or light cycle oil to reach 180 or 380 viscosity.
▶How it works
The fuel is heated to about 130 C or more for injection. The 380 grade is usually cheaper per tonne than 180 because it needs less of the more expensive distillate cutter to reach its viscosity.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
IFO 380 in high-sulphur and 0.50 percent forms is sold at Fujairah. Gulf refineries produce the residual component. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.
Moléculas principais
Normas e especificações
| ISO 8217 | RME 180 and RMG 380 grades: density 991 kg/m3 max, viscosity 180 or 380 mm2/s max at 50 C, flash point 60 C min. |
|---|---|
| MARPOL Annex VI | Sulphur limits. |
Riscos
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Como é negociado
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts 380 CST HSFO and 180 CST assessments
Typical cargo
Bunker barge or tanker
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
380 is the global benchmark viscosity.
Refinarias que o produzem: nossas sugestões
91 refinarias listadas produzem este produto, 21 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcesso de exportação
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcesso de exportação
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
Terminais que o movimentam
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Você sabia
💡 The numbers are viscosity in mm2/s at 50 C, not density.
💡 The 50 C test temperature is used because heavy fuel is too thick to measure conveniently at 40 C.
Teste seus conhecimentos sobre IFO 380 and IFO 180
What does 380 mean in IFO 380?
Mais neste grupo
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
Fontes
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Port of Fujairah (Wikipedia)
- Fujairah (Wikipedia)
Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.






