Ir para o conteúdo

Heavy fuels

Residual Fuel Oil (RFO / MFO)

Residual fuel oil is what remains after lighter products are distilled from crude. It is thick, dense and sulphur-rich, and it is burned in ships, boilers and power plants.

← Todos os produtosTambém chamado de: Mazut, MFO, Marine fuel oil, Fuel oil No. 6, Bunker C, Black oil

  • Ponto de fulgorMin 60 C typical (Wikipedia: about 65 C for No. 6)
  • Densidade950 to 1030 kg/m³
  • Viscosidade50 to 700 mm2/s at 50 C
  • Fluidez a frioUp to 30 C
  • Enxofre0.5 to 4% typical
  • PerigoUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Cor típica, vidro de laboratório
Amostra de Residual Fuel Oil (RFO / MFO) em vidro de laboratório, na cor típica
Uma amostra de Residual Fuel Oil (RFO / MFO) em vidro de laboratório sobre fundo escuro de estúdio, para facilitar a avaliação da cor.
Fotografia de referência
Como Residual Fuel Oil (RFO / MFO) é armazenado e movimentado na prática.

Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0.

Agite o líquido para sentir a sua espessura

Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.

Muito espesso
A cor segue a cor típica de Residual Fuel Oil (RFO / MFO).
Fino e soltoEspesso e pesado

Muito espesso Muito pesado. Quase não se move e volta a escorrer lentamente.

Viscosidade típica segundo os dados50 to 700 mm2/s at 50 C

Velocidade de agitação
0 px/s
Movimento do líquido
0%
Assentou após
-
Superfície
Parado

A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.

Aspecto esperado

Black, tarry

Onde é usado

  • Ship fuel
  • Power plant fuel
  • Industrial boilers
  • Cement kilns

Manuseamento e segurança

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Propriedades típicas

Aparência
Black, tarry
Densidade a 15 °C
950 to 1030 kg/m³
Ponto de fulgor
Min 60 C typical (Wikipedia: about 65 C for No. 6)
Viscosidade
50 to 700 mm2/s at 50 C
Ponto de fluidez
Up to 30 C
Enxofre típico
0.5 to 4% typical

◉What it is

Residual fuel oil is the heaviest liquid product of a refinery. It is the vacuum residue or atmospheric residue, usually blended with a lighter cutter stock to adjust viscosity. In the US it is fuel oil No. 6 or Bunker C; in Russia and Central Asia it is called mazut; in power industries it may be called MFO (marine fuel oil or mazut fuel oil). Density is about 0.95 to 1.03 g/cm3 (Wikipedia). It must be heated to flow: No. 6 needs preheating to about 104 to 127 C (Wikipedia). The fuel is cheap but polluting.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛A química

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

Vacuum distillation leaves vacuum residue, which can be visbroken to cut viscosity. The result is diluted with distillates.

▶How it works

Heated, filtered and atomised to burn in boilers and slow engines.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf refineries produce fuel oil and Fujairah stores and blends it. Central Asia uses mazut for power and heating. Volumes are not stated.

Moléculas principais

Normas e especificações

ISO 8217Marine residual grades
ASTM D396US fuel oil grades including No. 5 and No. 6
GOST 10585Russian mazut specification

Riscos

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Classe Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Como é negociado

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.4 to 6.6 bbl per mt.

Benchmarks

Platts FOB Arab Gulf HSFO 380 and fuel oil 180 assessments

Typical cargo

Tanker parcels 20,000 to 80,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

Often sold by cargo, with large volumes from Gulf refineries.

Refinarias que o produzem: nossas sugestões

91 refinarias listadas produzem este produto, 21 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.

Ver todos os 91 no mapa

Terminais que o movimentam

Você sabia

💡 No. 6 oil is also called Bunker C and needs preheating to about 104 to 127 C (Wikipedia).

💡 Residual fuel oil often has a density close to that of water, from about 0.95 to 1.03 g/cm3.

Teste seus conhecimentos sobre Residual Fuel Oil (RFO / MFO)

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

What is mazut?

Mais neste grupo

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.