Heavy fuels
Slurry Oil (Decant Oil)
Slurry oil is the heavy bottom product of an FCC fractionator. After settling out catalyst it is called clarified slurry or decant oil.
← Todos os produtosTambém chamado de: FCC slurry, Clarified slurry oil, CSO, Decant oil, FCC bottoms
- Ponto de fulgorAbove 100 C typical
- Densidade990 to 1100 kg/m³
- ViscosidadeVaries; 20 to 200 mm2/s at 100 C
- Fluidez a frioAbove 20 C typical
- Enxofre0.5 to 3%
- Faixa de ebulição340 to 600 °C

Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0.
Agite o líquido para sentir a sua espessura
Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.
Muito espesso Muito pesado. Quase não se move e volta a escorrer lentamente.
Viscosidade típica segundo os dadosVaries; 20 to 200 mm2/s at 100 C
- Velocidade de agitação
- 0 px/s
- Movimento do líquido
- 0%
- Assentou após
- -
- Superfície
- Parado
A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.
Aspecto esperado
Black, viscous
Onde é usado
- Carbon black feedstock
- Needle coke feedstock
- Fuel oil blendstock
Manuseamento e segurança
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Contains aromatics and may carry carcinogenic polycyclic aromatics.
Propriedades típicas
- Aparência
- Black, viscous
- Densidade a 15 °C
- 990 to 1100 kg/m³
- Faixa de ebulição
- 340 to 600 °C
- Ponto de fulgor
- Above 100 C typical
- Viscosidade
- Varies; 20 to 200 mm2/s at 100 C
- Ponto de fluidez
- Above 20 C typical
- Enxofre típico
- 0.5 to 3%
◉What it is
Slurry oil is the heavy aromatic liquid left at the base of an FCC main fractionator. It contains catalyst fines, so some is recycled and some is sent to a settler. The clear oil from the top of the settler is decant oil (Wikipedia). It is a feed for carbon black, needle coke and carbon fibre production, and a blendstock for heavy fuel oil.
⬡What it is made of
Highly aromatic C20 to C50 hydrocarbons, polynuclear aromatics.
⚛A química
Slurry oil is rich in condensed aromatic rings, which gives high density and a high carbon content. This makes it a good carbon black or needle coke feed.
⚙How it is made
Fractionation at the bottom of an FCC main column; settling removes catalyst fines.
▶How it works
Aromatics burn with a smoky flame but give good carbon yield in carbon black reactors.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Slurry oil is produced wherever refineries run FCC units. Gulf volumes and uses are not stated.
Moléculas principais
Normas e especificações
| ASTM D4294 | Test method for sulphur by energy-dispersive X-ray fluorescence. |
|---|---|
| Contract specification | Typically density, sulphur, catalyst fines and BMCI. |
Riscos
Contains aromatics and may carry carcinogenic polycyclic aromatics.
Como é negociado
Units
Metric tonnes
Benchmarks
Platts FCC slurry oil assessments (USGC), HSFO as reference
Typical cargo
Tanker or barge parcels
Incoterms
FOB, CIF
Notes
Priced against HSFO or carbon black demand.
Refinarias que o produzem: nossas sugestões
91 refinarias listadas produzem este produto, 21 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcesso de exportação
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcesso de exportação
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
Terminais que o movimentam
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Você sabia
💡 Slurry oil contains residual catalyst fines that can wear pumps.
💡 Decant oil is used as a fuel oil blending stock or carbon black feedstock (Wikipedia).
Teste seus conhecimentos sobre Slurry Oil (Decant Oil)
What is clarified slurry oil also called?
Mais neste grupo
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Cutter Stock
- Furnace Oil
Fontes
Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.






