Перейти к содержимому

Bitumen and solids

Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Paving grade bitumen is a black, sticky binder graded by how deep a standard needle sinks into it. In the EN 12591 range the grades run from 35/50 (hardest) to 160/220 (softest), and other standards also use grades such as 60/70 and 80/100.

← Все продуктыДругие названия: Penetration grade bitumen, Asphalt cement, Bitumen 60/70, Bitumen 80/100, Bitumen 40/50, Asphalt binder

  • Температура вспышкиAbove about 230 C (Cleveland open cup) for most grades
  • Плотность1000 to 1060 kg/m³
  • ВязкостьGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
  • Сера1 to 6% depending on crude
  • ОпасностьUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
Образец Bitumen 40/50, 60/70 and 80/100 (Paving Grades) в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Эталонная фотография
Как Bitumen 40/50, 60/70 and 80/100 (Paving Grades) хранят и перевозят на практике.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.

Помешайте жидкость, чтобы почувствовать её густоту

Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.

Полутвёрдый
Цвет соответствует типичному цвету Bitumen 40/50, 60/70 and 80/100 (Paving Grades).
Жидкая и подвижнаяГустая и тяжёлая

Полутвёрдый При обычной температуре полутвёрдый. Лишь медленно ползёт, для перекачки его нужно нагревать.

Типичная вязкость по даннымGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade

Скорость перемешивания
0 px/с
Движение жидкости
0%
Успокоилась через
-
Поверхность
Покой

Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.

Внешний вид

Black, glossy at hot, brittle when cold

Где применяется

  • Road paving
  • Airport runways
  • Roofing and waterproofing
  • Hot-mix asphalt in ports and car parks

Обращение и безопасность

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Типичные свойства

Внешний вид
Black, glossy at hot, brittle when cold
Плотность при 15 °C
1000 to 1060 kg/m³
Температура вспышки
Above about 230 C (Cleveland open cup) for most grades
Вязкость
Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
Температура застывания
Not applicable
Типичное содержание серы
1 to 6% depending on crude

◉What it is

Bitumen is the heavy residue of crude distillation. Wikipedia describes it as the heavy fraction boiling above about 500 C after vacuum distillation. Paving grades are defined by penetration at 25 C in tenths of a millimetre: 40/50 means 40 to 50 units. Hard grades such as 40/50 resist rutting in hot climates and heavy traffic, while softer grades like 80/100 resist cracking in cold climates. It is stored and moved at about 150 C.

⬡What it is made of

C40+ asphaltenes, resins, saturates and aromatics; sulphur 1 to 6%.

⚛Химия

Bitumen is a colloidal system: asphaltene clusters dispersed in an oily maltene phase of resins, aromatics and saturates. The ratio decides stiffness. More asphaltenes make a harder bitumen.

⚙How it is made

Vacuum distillation residue from suitable crude oils (such as heavy Middle East crudes) is the base. Air blowing or blending of hard and soft components adjusts penetration.

▶How it works

Penetration (ASTM D5, EN 1426), softening point (ASTM D36, EN 1427) and viscosity are used to measure stiffness. It binds aggregate in asphalt concrete, becoming fluid at 150 C and solid at ambient temperature.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.

★Why it matters in the Gulf

The GCC consumes large volumes of bitumen in road and airport projects, and Gulf and Iranian bitumen is traded to Central Asia and East Africa. Refinery-by-refinery supply and export volumes are not stated.

Ключевые молекулы

Стандарты и спецификации

EN 12591European specification for paving grade bitumens (penetration grades).
ASTM D946US penetration-graded asphalt cement.
ASTM D3381Viscosity-graded asphalt cement.
AASHTO M 320Performance-graded asphalt binder.

Опасности

UN3257 for hot bitumen shipped as an elevated temperature liquidКласс Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Как им торгуют

Units

Metric tonnes

Benchmarks

Contract-based; price tracks crude oil and fuel oil; no futures

Typical cargo

Bulk bitumen vessels 3,000 to 20,000 mt; ISO tanks; drums

Incoterms

FOB, CFR, CIF bulk; ISO tank FCA

Notes

Penetration grades such as 60/70 are common export trade grades. Origin and volume data are not stated.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 54, из них в странах Персидского залива, Иране и Ираке: 17. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (54) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 In American usage asphalt means bitumen, and asphalt concrete is the paving mix with stone (Wikipedia).

💡 Natural bitumen from the Dead Sea was used by the Egyptians for embalming (Wikipedia).

Проверьте себя: Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Вопрос 1 из 3 · Счёт 0 · Серия 0

What does 60/70 mean?

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.