Перейти к содержимому

Bitumen and solids

Polymer Modified Bitumen (PMB)

PMB is bitumen blended with polymers such as SBS to improve elasticity and temperature performance. It is used on heavy traffic roads and in roofing membranes.

← Все продуктыДругие названия: PMB, SBS modified bitumen, PG 76-22, Modified binder

  • Температура вспышкиTypically above 220 C (varies by grade)
  • Плотность1000 to 1040 kg/m³
  • ВязкостьSoftening point at least 65 C for the PMB 45/80-65 grade
  • Сера1 to 6%
  • ОпасностьUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: Polymer Modified Bitumen (PMB)
Образец Polymer Modified Bitumen (PMB) в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Эталонная фотография
Как Polymer Modified Bitumen (PMB) хранят и перевозят на практике.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.

Polymer Modified Bitumen (PMB) при нормальной температуре является твёрдым веществом, поэтому перемешивать нечего. Softening point at least 65 C for the PMB 45/80-65 grade

Внешний вид

Black

Где применяется

  • Heavy traffic roads
  • Airports
  • Bridge decks
  • Roofing membranes

Обращение и безопасность

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Типичные свойства

Внешний вид
Black
Плотность при 15 °C
1000 to 1040 kg/m³
Температура вспышки
Typically above 220 C (varies by grade)
Вязкость
Softening point at least 65 C for the PMB 45/80-65 grade
Температура застывания
Not applicable
Типичное содержание серы
1 to 6%

◉What it is

Polymer modified bitumen is conventional bitumen that has been blended with polymers. The most common is SBS (styrene-butadiene-styrene), which adds elasticity and resistance to rutting and cracking. Others are plastomers such as EVA and recycled rubber (Wikipedia mentions tyre rubber). PMB is graded by softening point, elastic recovery and penetration. It costs more than plain bitumen but extends pavement life.

⬡What it is made of

Bitumen plus 2 to 7% polymer; sometimes cross-linking agent such as sulphur.

⚛Химия

SBS has hard polystyrene end blocks and soft polybutadiene mid blocks. In bitumen the blocks form a network that gives rubber-like elasticity.

⚙How it is made

Base bitumen is mixed with polymer in high shear mills at 170 to 190 C, then held for swelling.

▶How it works

The polymer network lets the binder stretch and recover, so pavement resists rutting in summer and cracking in winter.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.

★Why it matters in the Gulf

PMB is relevant for Gulf highways and airports where summer pavement temperatures are very high. Regional plant details are not stated.

Ключевые молекулы

Стандарты и спецификации

EN 14023European framework specification for polymer modified bitumens.
AASHTO M 320 and M 332Performance-graded binder specifications, M 332 using the multiple stress creep recovery test.
ASTM D6373Performance-graded asphalt binder.

Опасности

UN3257 for hot bitumen shipped as an elevated temperature liquidКласс Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Как им торгуют

Units

Metric tonnes

Benchmarks

Contract price; premium over 60/70

Typical cargo

Tank truck, ISO tank, drums

Incoterms

DAP, FCA, FOB

Notes

Priced at a premium over plain bitumen; the premium varies by market.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 73, из них в странах Персидского залива, Иране и Ираке: 22. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (73) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 SBS is the polymer most often used to modify bitumen.

💡 Polymer modification raises elasticity and resistance to rutting.

Проверьте себя: Polymer Modified Bitumen (PMB)

Вопрос 1 из 3 · Счёт 0 · Серия 0

Common polymer in PMB?

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.