Перейти к содержимому

Bitumen and solids

Cutback Bitumen

Cutback bitumen is bitumen thinned with a petroleum solvent so it can be applied cold. The solvent evaporates and leaves the hard bitumen.

← Все продуктыДругие названия: Cut-back bitumen, RC, MC, SC cutbacks, Road oil, Rapid curing cutback

  • Плотность920 to 1000 kg/m³
  • Сера1 to 4%
  • ОпасностьUN1999, Class 3 flammable liquid (tars, liquid, including road oils and cutback bitumens)
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: Cutback Bitumen
Образец Cutback Bitumen в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Эталонная фотография
Как Cutback Bitumen хранят и перевозят на практике.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.

Помешайте жидкость, чтобы почувствовать её густоту

Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.

Густая
Цвет соответствует типичному цвету Cutback Bitumen.
Жидкая и подвижнаяГустая и тяжёлая

Густая Тяжёлая. Сопротивляется перемешиванию и движется лишь медленно.

Скорость перемешивания
0 px/с
Движение жидкости
0%
Успокоилась через
-
Поверхность
Покой

Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.

Внешний вид

Dark brown to black liquid

Где применяется

  • Prime coat on granular base
  • Tack coat
  • Cold mix patching

Обращение и безопасность

  • Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.
  • Flammable vapour; keep away from ignition.

Типичные свойства

Внешний вид
Dark brown to black liquid
Плотность при 15 °C
920 to 1000 kg/m³
Вязкость
Measured by Saybolt Furol or Engler viscosity
Температура застывания
Not applicable
Типичное содержание серы
1 to 4%

◉What it is

Cutback bitumen is made by dissolving bitumen in a volatile solvent such as naphtha, kerosene or diesel. The solvent type decides the curing speed: rapid curing (RC) uses naphtha, medium curing (MC) uses kerosene and slow curing (SC) uses gasoil. It is used for tack coats, prime coats and cold patching. Cutbacks emit volatile organic compounds, so many countries have shifted to emulsions.

⬡What it is made of

Bitumen 60 to 80% plus solvent 20 to 40%.

⚛Химия

Solvent molecules lower the viscosity by breaking asphaltene clusters. After spraying, the solvent evaporates and the bitumen hardens.

⚙How it is made

Hot bitumen is blended with solvent at 100 to 140 C in tanks.

▶How it works

Applied by spray at 20 to 80 C, the solvent evaporates (cure) over minutes (RC) to days (SC).

▣Storage, loading and inspection

Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.

★Why it matters in the Gulf

Cutbacks are used in road works for prime coats, and VOC rules push use toward emulsions. Regional volumes are not stated.

Ключевые молекулы

Стандарты и спецификации

ASTM D2028Rapid curing cutback
ASTM D2027Medium curing cutback
ASTM D2026Slow curing cutback
IS 217India cutback bitumen

Опасности

UN1999Класс Class 3 flammable liquid (tars, liquid, including road oils and cutback bitumens)

Flammable vapour; keep away from ignition.

Как им торгуют

Units

Metric tonnes; drums

Benchmarks

Contract

Typical cargo

Bulk or drums

Incoterms

FOB, DAP

Notes

Trade is smaller than for bitumen.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 54, из них в странах Персидского залива, Иране и Ираке: 17. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (54) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 Cutback production is decreasing because solvents evaporate as VOCs.

💡 Bitumen is sometimes mixed with diesel oil or kerosene before shipping (Wikipedia).

Проверьте себя: Cutback Bitumen

Вопрос 1 из 3 · Счёт 0 · Серия 0

What is cutback bitumen?

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.