Middle distillates
Diesel EN 590 (10 ppm)
EN 590 is the European specification for road diesel, limited to 10 mg/kg of sulphur. It is the most widely traded clean diesel grade outside North America.
← 全部产品又称: EN 590 diesel, Euro diesel, ULSD 10 ppm, Gasoil 10 ppm
- 闪点Above 55 C (EN 590 minimum)
- 密度820 to 845 kg/m³
- 黏度2.0 to 4.5 mm2/s at 40 C
- 冷流性Set by climate class. Temperate classes A to F have a maximum CFPP from +5 to minus 20 C; arctic classes 0 to 4 run from minus 20 to minus 44 C.
- 硫Max 10 mg/kg (10 ppm)
- 沸程170 to 360 °C


图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片. 照片:根据参考照片制作,作者: DanTD, CC BY-SA 3.0, 来自 Wikimedia Commons.
搅动液体,感受它有多稠
用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。
稀 轻而流动顺畅。波纹传播快,消退慢。
数据中的典型粘度2.0 to 4.5 mm2/s at 40 C
- 搅动速度
- 0 像素/秒
- 液体运动
- 0%
- 静止所需时间
- -
- 表面
- 静止
该等级仅供手感参考。所示粘度数值以规格数据为准。
外观
Clear to pale yellow liquid, bright and free of visible water
应用领域
- Cars, vans, trucks and buses
- Rail locomotives and light marine engines
- Generators and construction machinery
- Blending base for biodiesel and HVO blends
装卸与安全
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
典型性质
- 外观
- Clear to pale yellow liquid, bright and free of visible water
- 15 °C 密度
- 820 to 845 kg/m³
- 沸程
- 170 to 360 °C
- 闪点
- Above 55 C (EN 590 minimum)
- 黏度
- 2.0 to 4.5 mm2/s at 40 C
- 倾点
- Set by climate class. Temperate classes A to F have a maximum CFPP from +5 to minus 20 C; arctic classes 0 to 4 run from minus 20 to minus 44 C.
- 典型含硫量
- Max 10 mg/kg (10 ppm)
◉What it is
EN 590 diesel is the standard automotive diesel in the European Union and is also referenced by many importing countries outside Europe. The standard sets limits for sulphur, cetane number, density, distillation, flash point, cold flow and lubricity. Its sulphur limit of 10 ppm matches Euro 5 and later vehicle standards and allows modern exhaust filters to work. The fuel may contain up to 7 percent by volume of fatty acid methyl ester (FAME) biodiesel. It is made mainly by hydrotreating middle distillate streams from crude distillation and cracking units.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛化学成分
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Crude oil is split in the atmospheric distillation unit (CDU). Straight-run gasoil, together with light cycle oil from FCC units and gasoil from hydrocrackers or cokers, is sent to a hydrotreater that uses hydrogen over a cobalt-molybdenum or nickel-molybdenum catalyst to remove sulphur and nitrogen. Cetane improvers, lubricity additives and cold-flow improvers are added in the blending stage.
▶How it works
In a diesel engine the fuel is injected into hot compressed air and ignites without a spark. Cetane number (minimum 51 in EN 590) measures ignition quality: a higher number means shorter ignition delay and smoother combustion. Low sulphur removes the sulphur dioxide that would poison catalysts and filters, but severe hydrotreating also removes natural lubricating compounds, so lubricity additives are added.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refineries export diesel to East Africa, Pakistan and Europe, and Fujairah and Jebel Ali are major storage and trading points. Wikipedia reports about 10 million cubic metres of refined-product storage at Fujairah. The sulphur grades of Gulf domestic road diesel are not stated.
主要分子
标准与规格
| EN 590 | European road diesel specification: sulphur 10 mg/kg max, cetane number 51 min, density 820 to 845 kg/m3, up to 7% v/v FAME. |
|---|---|
| EN 14214 | Quality standard for the FAME biodiesel allowed as a blend component |
| ASTM D975 | US counterpart; not interchangeable with EN 590 limits |
危害
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
交易方式
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts and Argus assessments for ULSD 10 ppm in Northwest Europe and the Mediterranean; ICE Low Sulphur Gasoil futures (a 10 ppm contract) as the paper benchmark
Typical cargo
Commonly 30,000 to 37,000 mt on a Medium Range tanker or 5,000 to 10,000 mt barges for coastal trades
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Quality is verified by independent surveyors against the EN 590 certificate of analysis at load port.
可生产此产品的炼厂:我们的推荐
已收录 152 家炼厂生产此产品,其中 42 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversion导出权限
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperating导出权限
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversion导出权限
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversion导出权限
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperating导出权限
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperating导出权限
可处理该产品的码头
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
你知道吗
💡 Cetane number minimum was 49 for Euro 1 and 2 diesel and rose to 51 for Euro 3 to 5 (Wikipedia).
💡 The sulphur limit fell from 0.2 percent (2,000 ppm) at Euro 1 to 10 mg/kg from 2009, a cut of 99.5 percent.
测验您对 Diesel EN 590 (10 ppm) 的掌握
What is the maximum sulphur content in EN 590 diesel?
该组更多内容
- Jet A-1
- Kerosene (illuminating)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
来源
由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。







