Middle distillates
Gasoil 50 ppm
Gasoil 50 ppm is a middle distillate with sulphur limited to 50 ppm (0.005% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.
← 全部产品又称: Diesel 50 ppm, Euro 4 diesel, Gasoil 0.005% S
- 闪点Above 55 C typical (min 52 to 60 C depending on contract)
- 密度820 to 860 kg/m³
- 黏度2.0 to 4.5 mm2/s at 40 C typical
- 硫Max 50 ppm (0.005% m/m)
- 沸程170 to 375 °C
- 危险性UN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片. 照片:根据参考照片制作,作者: DanTD, CC BY-SA 3.0, 来自 Wikimedia Commons.
搅动液体,感受它有多稠
用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。
稀 轻而流动顺畅。波纹传播快,消退慢。
数据中的典型粘度2.0 to 4.5 mm2/s at 40 C typical
- 搅动速度
- 0 像素/秒
- 液体运动
- 0%
- 静止所需时间
- -
- 表面
- 静止
该等级仅供手感参考。所示粘度数值以规格数据为准。
外观
Clear to pale yellow, may be dyed by local rule
应用领域
- Road diesel in markets that still allow this sulphur level
- Power generation and industrial burners
- Mining and construction equipment
- Agricultural and fishing vessels
装卸与安全
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
典型性质
- 外观
- Clear to pale yellow, may be dyed by local rule
- 15 °C 密度
- 820 to 860 kg/m³
- 沸程
- 170 to 375 °C
- 闪点
- Above 55 C typical (min 52 to 60 C depending on contract)
- 黏度
- 2.0 to 4.5 mm2/s at 40 C typical
- 倾点
- Varies by season
- 典型含硫量
- Max 50 ppm (0.005% m/m)
◉What it is
Gasoil 50 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 4 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Intermediate grade between 500 ppm and 10 ppm.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛化学成分
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.
▶How it works
Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners export 50 ppm gasoil to importers whose standards sit between 500 ppm and 10 ppm, with storage and blending at Fujairah. Volumes are not stated.
主要分子
标准与规格
| EN 590 (older editions) | European road diesel was limited to 50 mg/kg sulphur from 2005, before the 10 mg/kg limit from 2009 (Wikipedia). |
|---|---|
| ASTM D975 S15 and S500 | US grades with 15 ppm and 500 ppm maximum sulphur; there is no US 50 ppm grade. |
| Contract or national specification | Many importing countries set their own limits. |
危害
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
交易方式
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price
Typical cargo
Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.
可生产此产品的炼厂:我们的推荐
已收录 152 家炼厂生产此产品,其中 42 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversion导出权限
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperating导出权限
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversion导出权限
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversion导出权限
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperating导出权限
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperating导出权限
可处理该产品的码头
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
你知道吗
💡 50 ppm equals 0.005 percent by mass.
💡 The EU moved from 50 mg/kg to 10 mg/kg diesel sulphur from 2009 (Wikipedia).
测验您对 Gasoil 50 ppm 的掌握
What is the sulphur limit in Gasoil 50 ppm?
该组更多内容
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
来源
由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。







