跳至正文
登录申请报价

Middle distillates

Marine Gasoil MGO (DMA)

MGO is a clear distillate marine fuel specified as DMA in ISO 8217. It is used in smaller engines, auxiliary engines and ships operating in emission control areas.

← 全部产品又称: MGO, DMA, Marine gas oil, Marine diesel oil (loosely)

  • 闪点Min 60 C (ISO 8217)
  • 密度800 to 890 kg/m³
  • 黏度2.0 to 6.0 mm2/s at 40 C
  • 冷流性Winter max 0 C; summer max 6 C (ISO 8217)
  • 硫Max 1.0% historically; typically below 0.10% for LSMGO
  • 沸程170 to 380 °C
典型颜色,实验室玻璃
Marine Gasoil MGO (DMA) 的实验室玻璃样品,呈典型颜色
Marine Gasoil MGO (DMA) 的实验室玻璃样品,深色影棚背景,便于判断颜色。
参考照片
Marine Gasoil MGO (DMA) 在实际中如何储存和运输。

图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片. 照片:根据参考照片制作,作者: Грищук ЮН, CC BY-SA 3.0, 来自 Wikimedia Commons.

搅动液体,感受它有多稠

用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。

稀
颜色与 Marine Gasoil MGO (DMA) 的典型颜色一致。
稀而松散稠而重

稀 轻而流动顺畅。波纹传播快,消退慢。

数据中的典型粘度2.0 to 6.0 mm2/s at 40 C

搅动速度
0 像素/秒
液体运动
0%
静止所需时间
-
表面
静止

该等级仅供手感参考。所示粘度数值以规格数据为准。

外观

Clear and bright, pale yellow

应用领域

  • Auxiliary engines on all ships
  • Main engines of small vessels
  • Boilers and incinerators
  • ECA compliance fuel

装卸与安全

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

典型性质

外观
Clear and bright, pale yellow
15 °C 密度
800 to 890 kg/m³
沸程
170 to 380 °C
闪点
Min 60 C (ISO 8217)
黏度
2.0 to 6.0 mm2/s at 40 C
倾点
Winter max 0 C; summer max 6 C (ISO 8217)
典型含硫量
Max 1.0% historically; typically below 0.10% for LSMGO

◉What it is

Marine gasoil is a distillate fuel supplied to ships under the ISO 8217 grade DMA. It has no residual oil, so it is cleaner and easier to handle than heavy fuel and does not need heating in most climates. Ships use it in auxiliary engines, in smaller main engines, for boiler lighting and when entering emission control areas. The standard limits sulphur through MARPOL, which is 0.50 percent in global waters and 0.10 percent in ECAs. DMA has a maximum viscosity of 6 mm2/s at 40 C and maximum density of 890 kg/m3 at 15 C.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛化学成分

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled from crude in the CDU and hydrotreated; may be blended with cracked gasoil and kerosene components.

▶How it works

Burns in diesel engines without heating. Low viscosity requires cooling the fuel at the injectors to keep the viscosity above minimum for lubrication.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Fujairah is one of the world's largest bunkering hubs and supplies MGO to ships passing the Strait of Hormuz. No emission control area covers the Gulf (the ECAs are the Baltic Sea, North Sea, North America, the US Caribbean and the Mediterranean), but ships may buy MGO for ECA calls elsewhere. Current volumes are not stated.

主要分子

标准与规格

ISO 8217Marine fuels standard; DMA grade: viscosity 2.0 to 6.0 mm2/s at 40 C, density 890 kg/m3 max, flash point 60 C min.
MARPOL Annex VI0.50% global and 0.10% ECA sulphur limits (IMO).
ISO 4259Precision of test methods and use of precision data.

危害

UN1202 (diesel fuel or gas oil)船型级别 Class 3 flammable liquid, packing group III (when shipped as dangerous goods)

SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

交易方式

Units

Metric tonnes

Benchmarks

Platts MGO assessments at Fujairah, Singapore, Rotterdam and other ports; ICE Gasoil futures as reference

Typical cargo

Barge deliveries of 100 to 2,000 mt; bulk cargoes by MR tanker

Incoterms

FOB barge at the port or delivered ex-wharf; ships purchase on a DAP basis at anchorage.

Notes

Sold per mt with a BDN (bunker delivery note) and MARPOL sample.

可生产此产品的炼厂:我们的推荐

已收录 152 家炼厂生产此产品,其中 42 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。

在地图上查看全部 152 个

可处理该产品的码头

你知道吗

💡 MGO is the cleanest standard marine fuel and a distillate similar to No. 2 diesel.

💡 DMA is limited to 6.0 mm2/s at 40 C, while the residual grade RMG 380 is limited to 380 mm2/s at 50 C.

测验您对 Marine Gasoil MGO (DMA) 的掌握

第 1 题,共 3 题 · 得分 0 · 连对 0

What is the max viscosity of DMA at 40 C?

该组更多内容

来源

由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。