跳至正文
登录申请报价

Middle distillates

Heating Oil

Heating oil is a light distillate similar to diesel that is burned in boilers and furnaces. It is often dyed or marked for tax reasons.

← 全部产品又称: Home heating oil, Fuel oil No. 2, Gasoil for heating, Domestic heating oil

  • 闪点Above 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
  • 密度820 to 870 kg/m³
  • 黏度1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
  • 冷流性Typically below -6 C for grade 2
  • 硫Varies from 10 ppm to 0.1% depending on market
  • 沸程170 to 390 °C
典型颜色,实验室玻璃
Heating Oil 的实验室玻璃样品,呈典型颜色
Heating Oil 的实验室玻璃样品,深色影棚背景,便于判断颜色。
参考照片
Heating Oil 在实际中如何储存和运输。

图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片. 照片:根据参考照片制作,作者: DanTD, CC BY-SA 3.0, 来自 Wikimedia Commons.

搅动液体,感受它有多稠

用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。

稀
颜色与 Heating Oil 的典型颜色一致。
稀而松散稠而重

稀 轻而流动顺畅。波纹传播快,消退慢。

数据中的典型粘度1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)

搅动速度
0 像素/秒
液体运动
0%
静止所需时间
-
表面
静止

该等级仅供手感参考。所示粘度数值以规格数据为准。

外观

Pale yellow to red or blue when dyed

应用领域

  • Home and building heating
  • Industrial boilers and dryers
  • Backup generators
  • Blending stock for diesel in some markets

装卸与安全

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

典型性质

外观
Pale yellow to red or blue when dyed
15 °C 密度
820 to 870 kg/m³
沸程
170 to 390 °C
闪点
Above 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
黏度
1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
倾点
Typically below -6 C for grade 2
典型含硫量
Varies from 10 ppm to 0.1% depending on market

◉What it is

Heating oil is a low-viscosity fuel used for space heating in homes and commercial buildings. In North America it is called No. 2 fuel oil and is chemically almost identical to diesel, but it is taxed less and marked with dye or chemical tracers. In Europe it is often a gasoil with higher allowed sulphur or a lower cost specification. Heating oil burns in pressure-jet burners after atomisation. Because it is stored in outdoor or basement tanks, cold-flow quality and stability during long storage matter.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛化学成分

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Taken from the middle distillate cut of the CDU and treated in hydrotreaters to the required sulphur level. Cheaper marker dyes and tracers are added where tax rules require.

▶How it works

Atomised oil mixes with air and burns, releasing about 38 MJ per litre. Sulphur determines the amount of SO2 in flue gas. Wax crystals can block filters in cold weather, so winter grades are blended with kerosene or additives.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Heating demand in the GCC is minimal. Heating oil specifications appear mainly in export trades and in storage at Fujairah. Central Asia, a priority region for PST, uses heating oil and similar grades seasonally.

主要分子

标准与规格

ASTM D396US standard for fuel oils, including No. 1 and No. 2 grades.
BS 2869 Class C2UK domestic heating oil (kerosene type).
National heating gasoil standardsEuropean heating gasoil rules vary by country, for example DIN 51603-1 in Germany.

危害

UN1202船型级别 Class 3 flammable liquid, packing group III (ADR/IMDG)

Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

交易方式

Units

Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage. In US trading, gallons and ULSD heating oil (NYMEX contract).

Benchmarks

NY Harbor heating oil and ULSD futures historically; Platts gasoil assessments in Europe and the Gulf

Typical cargo

Barge or tanker parcels from 2,000 to 30,000 mt

Incoterms

FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.

Notes

Often traded together with diesel and taxed differently by country.

可生产此产品的炼厂:我们的推荐

已收录 152 家炼厂生产此产品,其中 42 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。

在地图上查看全部 152 个

可处理该产品的码头

你知道吗

💡 Heating oil is dyed in many countries so authorities can detect illegal use in road vehicles.

💡 No. 2 heating oil is chemically very similar to diesel but is taxed less.

测验您对 Heating Oil 的掌握

第 1 题,共 3 题 · 得分 0 · 连对 0

In the US, heating oil is usually called which grade?

该组更多内容

来源

由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。