انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Heavy fuels

Cutter Stock

Cutter stock is a lighter oil blended into heavy residue to reduce its viscosity. Typical cutters are gasoil, kerosene or light cycle oil.

← كل المنتجاتيُسمى أيضاً: Cutter, Cutterstock, Cutting oil (fuel oil), Viscosity cutter

  • الكثافة800 to 950 kg/m³
  • اللزوجة1 to 30 mm2/s at 40 C
  • مدى الغليان170 to 400 °C
  • الخطرDepends on the cutter (for example UN1202 for gasoil), Depends on the cutter; Class 3 if gasoil or kerosene
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من Cutter Stock بلونها المعتاد
عينة من Cutter Stock في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
مقياس اللون
الألوان المعروفة لـ Cutter Stock.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.

حرّك السائل لتحس بمدى لزوجته

حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.

متوسط
اللون يتبع اللون المعتاد لـ Cutter Stock.
رقيق وسائبلزج وثقيل

متوسط زيتي. الموجات أبطأ وأكثر استدارة.

اللزوجة المعتادة من البيانات1 to 30 mm2/s at 40 C

سرعة التحريك
0 بكسل/ث
حركة السائل
0%
يستقر بعد
-
السطح
ساكن

الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.

مظهره

Clear to dark

أين يُستخدم

  • Fuel oil blending
  • Bitumen cutback

المناولة والسلامة

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Flammable if gasoil or kerosene.

الخصائص المعتادة

المظهر
Clear to dark
الكثافة عند 15 °C
800 to 950 kg/m³
مدى الغليان
170 to 400 °C
اللزوجة
1 to 30 mm2/s at 40 C
نقطة الانسكاب
Varies
الكبريت المعتاد
Varies

◉What it is

Cutter stock is any lighter petroleum stream used to dilute a heavy oil so it flows and meets a viscosity target. In fuel oil blending, it brings vacuum residue down to 180 or 380 mm2/s. Common cutters are gasoil, light cycle oil, kerosene, visbreaker gasoil and diesel. The cost, sulphur and density of the cutter directly affect the blend. Fuel oil blending is a major business at storage hubs.

⬡What it is made of

C10 to C25 distillate or cracked stock.

⚛الكيمياء

Light aromatic and paraffinic hydrocarbons act as solvent for asphaltenes. Too much paraffinic cutter can destabilise asphaltenes.

⚙How it is made

Taken from distillation or cracking units.

▶How it works

Blending uses a viscosity blending index to calculate how much cutter is needed.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Blenders in Fujairah use distillate cutter, typically gasoil or light cycle oil, to make bunker fuel. Specific blending volumes are not stated.

الجزيئات الرئيسية

المعايير والمواصفات

ISO 8217The finished blend must meet the marine fuel specification.
ASTM D341Viscosity-temperature charts for liquid petroleum products.

المخاطر

Depends on the cutter (for example UN1202 for gasoil)الفئة Depends on the cutter; Class 3 if gasoil or kerosene

Flammable if gasoil or kerosene.

كيف يُتداول

Units

Metric tonnes

Benchmarks

Priced from gasoil or LCO

Typical cargo

Barge or tanker

Incoterms

FOB

Notes

Cost tied to gasoil.

المصافي التي تنتجه: ترشيحاتنا

91 من المصافي المدرجة تنتج هذا المنتج، منها 21 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 91 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 Cutter stock cost can account for a large part of bunker blend price.

💡 Incompatible cutters can create sludge.

اختبر نفسك في Cutter Stock

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

What does cutter do?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.