انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Heavy fuels

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

ULSFO is a residual or blended fuel with sulphur at or below 0.10 percent. It is used in emission control areas in place of distillate fuel.

← كل المنتجاتيُسمى أيضاً: ULSFO, 0.1% sulphur fuel oil, ECA fuel oil

  • نقطة الوميضMin 60 C
  • الكثافة860 to 950 kg/m³
  • اللزوجة10 to 180 mm2/s at 50 C typical
  • الكبريتMax 0.10% m/m
  • الخطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) بلونها المعتاد
عينة من ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
صورة مرجعية
كيف يُخزَّن ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) وينقل عمليا.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) مادة صلبة في درجة الحرارة العادية، فلا يوجد سائل لتحريكه. 10 to 180 mm2/s at 50 C typical

مظهره

Dark to black

أين يُستخدم

  • ECA fuel for ships without scrubbers
  • Alternative to LSMGO

المناولة والسلامة

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

الخصائص المعتادة

المظهر
Dark to black
الكثافة عند 15 °C
860 to 950 kg/m³
نقطة الوميض
Min 60 C
اللزوجة
10 to 180 mm2/s at 50 C typical
نقطة الانسكاب
Varies by blend
الكبريت المعتاد
Max 0.10% m/m

◉What it is

ULSFO is a marine fuel designed to meet the 0.10 percent sulphur cap in ECAs without being a pure distillate. It is made from low sulphur components and is usually cheaper than LSMGO. Because the limit is so low, producing it from residue is challenging. It is not a formal ISO 8217 grade: it usually sits in the DMB or RMD/RME families with 0.10% sulphur. Supply is limited, and many ships simply use LSMGO.

⬡What it is made of

C15 to C50 mixture, mostly paraffinic and hydrotreated.

⚛الكيمياء

ULSFO is made by blending highly hydrotreated components, so it contains fewer aromatic and sulphur-bearing molecules than other residual fuels. The low sulphur level is the result of hydrodesulphurisation, which converts sulphur in organic molecules to H2S that is removed.

⚙How it is made

Hydrotreated residue, hydrocracker bottoms and distillate are blended; supply depends on the refinery.

▶How it works

Heated as a residual fuel. Low sulphur reduces acid corrosion but also cylinder oil cold corrosion if the engine uses high BN oil.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf demand is limited because there is no Gulf ECA, but ships heading to ECAs can buy low-sulphur fuels at Fujairah. ULSFO availability there is not stated.

الجزيئات الرئيسية

المعايير والمواصفات

MARPOL Annex VI Reg. 140.10% sulphur limit in ECAs from 1 January 2015 (IMO).
ISO 8217The applicable grade depends on viscosity; ULSFO is not a separate ISO grade.

المخاطر

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.الفئة Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

كيف يُتداول

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts ULSFO assessments (Singapore, Rotterdam, Fujairah)

Typical cargo

Barge deliveries

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

Not widely traded; priced between LSMGO and VLSFO.

المصافي التي تنتجه: ترشيحاتنا

121 من المصافي المدرجة تنتج هذا المنتج، منها 40 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 121 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 ULSFO volumes are small compared with VLSFO.

💡 The 0.10 percent ECA limit has applied since 1 January 2015 (IMO).

اختبر نفسك في ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

What sulphur does ULSFO have?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.