Heavy fuels
Furnace Oil
Furnace oil is a heavy residual fuel burned in industrial furnaces and boilers. It is a common name in South Asia for residual fuel oil.
← كل المنتجاتيُسمى أيضاً: Furnace fuel oil, FO, LSHS, Fuel oil No. 5/6
- نقطة الوميضMin 66 C (IS 1593)
- الكثافة930 to 1010 kg/m³
- اللزوجةUp to 370 mm2/s at 50 C in some grades
- الكبريت1.0 to 4.0%
- الخطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.
حرّك السائل لتحس بمدى لزوجته
حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.
لزج جدا ثقيل جدا. بالكاد يتحرك ويعود للانسياب ببطء.
اللزوجة المعتادة من البياناتUp to 370 mm2/s at 50 C in some grades
- سرعة التحريك
- 0 بكسل/ث
- حركة السائل
- 0%
- يستقر بعد
- -
- السطح
- ساكن
الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.
مظهره
Black, viscous
أين يُستخدم
- Industrial furnaces
- Boilers
- Power plants
المناولة والسلامة
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
الخصائص المعتادة
- المظهر
- Black, viscous
- الكثافة عند 15 °C
- 930 to 1010 kg/m³
- نقطة الوميض
- Min 66 C (IS 1593)
- اللزوجة
- Up to 370 mm2/s at 50 C in some grades
- نقطة الانسكاب
- Varies by grade and season
- الكبريت المعتاد
- 1.0 to 4.0%
◉What it is
Furnace oil is another name for residual fuel oil used in industrial heating. In Wikipedia's fuel oil article, furnace fuel oil is listed as an alias for heavier grades such as No. 5 and No. 6. It must be preheated to 90 to 110 C before atomisation. Indian specification IS 1593 defines grades such as FO and LSHS (low sulphur heavy stock). Users include steel plants, textile mills and power stations.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛الكيمياء
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
Blended residual and cutter.
▶How it works
Preheated, atomised and burned in industrial burners.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf residual fuel supplies South Asia and Africa. Central Asia may buy mazut-type fuel. Volumes are not stated.
الجزيئات الرئيسية
المعايير والمواصفات
| IS 1593 | Indian furnace oil standard |
|---|---|
| ASTM D396 No. 6 | US counterpart |
المخاطر
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
كيف يُتداول
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts Singapore and Arab Gulf fuel oil assessments
Typical cargo
Tanker parcels
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Used in South Asia.
المصافي التي تنتجه: ترشيحاتنا
91 من المصافي المدرجة تنتج هذا المنتج، منها 21 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionإمكانية التصدير
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingإمكانية التصدير
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionإمكانية التصدير
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingإمكانية التصدير
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingإمكانية التصدير
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionإمكانية التصدير
المحطات التي تتعامل معه
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
هل تعلم
💡 Furnace oil is sometimes called mazut in Russia.
💡 Furnace oil must be preheated before atomisation.
اختبر نفسك في Furnace Oil
Furnace oil is a type of?
المزيد في هذه المجموعة
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
المصادر
كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.






