انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Heavy fuels

IFO 380 and IFO 180

IFO 380 and IFO 180 are intermediate fuel oils named for their maximum viscosity in mm2/s at 50 C. They are blends of residual oil with some distillate.

← كل المنتجاتيُسمى أيضاً: Intermediate Fuel Oil 380, Intermediate Fuel Oil 180, RMG 380, RME 180, IFO

  • نقطة الوميضMin 60 C
  • الكثافة960 to 991 kg/m³
  • اللزوجةMax 180 or 380 mm2/s at 50 C
  • الانسياب على الباردMax 30 C
  • الكبريتDepends on type: HS up to 3.5%; VLS up to 0.50%
  • الخطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من IFO 380 and IFO 180 بلونها المعتاد
عينة من IFO 380 and IFO 180 في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
صورة مرجعية
كيف يُخزَّن IFO 380 and IFO 180 وينقل عمليا.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.

حرّك السائل لتحس بمدى لزوجته

حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.

لزج جدا
اللون يتبع اللون المعتاد لـ IFO 380 and IFO 180.
رقيق وسائبلزج وثقيل

لزج جدا ثقيل جدا. بالكاد يتحرك ويعود للانسياب ببطء.

اللزوجة المعتادة من البياناتMax 180 or 380 mm2/s at 50 C

سرعة التحريك
0 بكسل/ث
حركة السائل
0%
يستقر بعد
-
السطح
ساكن

الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.

مظهره

Black, viscous

أين يُستخدم

  • Ships with slow and medium speed diesel engines
  • Power stations

المناولة والسلامة

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

الخصائص المعتادة

المظهر
Black, viscous
الكثافة عند 15 °C
960 to 991 kg/m³
نقطة الوميض
Min 60 C
اللزوجة
Max 180 or 380 mm2/s at 50 C
نقطة الانسكاب
Max 30 C
الكبريت المعتاد
Depends on type: HS up to 3.5%; VLS up to 0.50%

◉What it is

Intermediate fuel oil is a marine residual fuel blend. The numbers refer to viscosity in centistokes at 50 C: 380 or 180. According to Wikipedia, IFO 380 is about 98 percent residual oil with 2 percent distillate, while IFO 180 is about 88 percent residual and 12 percent distillate. In ISO 8217 terms IFO 380 corresponds to RMG 380 and IFO 180 to RME 180. They were the main ship fuels before IMO 2020 and are still sold in high and low sulphur forms.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛الكيمياء

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

Vacuum residue or visbreaker residue is diluted with cutter stock or light cycle oil to reach 180 or 380 viscosity.

▶How it works

The fuel is heated to about 130 C or more for injection. The 380 grade is usually cheaper per tonne than 180 because it needs less of the more expensive distillate cutter to reach its viscosity.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

IFO 380 in high-sulphur and 0.50 percent forms is sold at Fujairah. Gulf refineries produce the residual component. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

الجزيئات الرئيسية

المعايير والمواصفات

ISO 8217RME 180 and RMG 380 grades: density 991 kg/m3 max, viscosity 180 or 380 mm2/s max at 50 C, flash point 60 C min.
MARPOL Annex VISulphur limits.

المخاطر

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.الفئة Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

كيف يُتداول

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts 380 CST HSFO and 180 CST assessments

Typical cargo

Bunker barge or tanker

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

380 is the global benchmark viscosity.

المصافي التي تنتجه: ترشيحاتنا

91 من المصافي المدرجة تنتج هذا المنتج، منها 21 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 91 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 The numbers are viscosity in mm2/s at 50 C, not density.

💡 The 50 C test temperature is used because heavy fuel is too thick to measure conveniently at 40 C.

اختبر نفسك في IFO 380 and IFO 180

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

What does 380 mean in IFO 380?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.