Skip to content

Solvents and chemicals

Benzene

Benzene is a single-ring aromatic hydrocarbon, C6H6, used to make styrene, phenol and nylon intermediates. It is a known human carcinogen.

← All productsAlso called: Benzol, Pure benzene, Nitration benzene, Aromatics

  • Flash point-11 C
  • Density876 to 886 kg/m³
  • ViscosityAbout 0.6 mPa.s at 20 C
  • Cold flowFreezing point 5.5 C
  • SulphurBelow 1 ppm (nitration grade)
  • Boiling range79.5 to 80.5 °C
Typical colour, laboratory glass
Laboratory glass sample of Benzene, in its typical colour
A sample of Benzene in laboratory glass on a dark studio background, so the colour is easy to judge.
Colour scale
The colours Benzene is known to show.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.

Stir the liquid to feel how thick it is

Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.

Very thin
Colour follows the typical colour of Benzene.
Thin and looseThick and heavy

Very thin Water-thin or thinner. Ripples run fast and ring for a long time.

Typical viscosity from the dataAbout 0.6 mPa.s at 20 C

Stir speed
0 px/s
Liquid movement
0%
Settled after
-
Surface
Still

The class is a guide for feel. The viscosity figure shown is the one in the specification data.

How it looks

Clear, colourless

Where it is used

  • Styrene (via ethylbenzene)
  • Phenol (via cumene)
  • Nylon (cyclohexane)
  • Maleic anhydride
  • Aniline

Handling and safety

  • Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading. Benzene needs closed loading and vapour recovery.
  • Carcinogenic (IARC Group 1), flammable; exposure limit about 1 ppm 8-hour in many countries.

Typical properties

Appearance
Clear, colourless
Density at 15 °C
876 to 886 kg/m³
Boiling range
79.5 to 80.5 °C
Flash point
-11 C
Viscosity
About 0.6 mPa.s at 20 C
Pour point
Freezing point 5.5 C
Typical sulphur
Below 1 ppm (nitration grade)

◉What it is

Benzene is a colourless, highly flammable liquid boiling at about 80 C. Most benzene today is made in the petrochemical industry by catalytic reforming, toluene dealkylation or disproportionation and steam cracking (Wikipedia). More than half of it becomes ethylbenzene for styrene, smaller shares become cumene for phenol and acetone and cyclohexane for nylon. IARC classifies benzene as carcinogenic to humans. Gasoline specifications cap benzene at about 1 percent in the US and Europe, with the US EPA lowering the limit to 0.62 percent.

⬡What it is made of

C6 aromatic; commercial grade over 99.9% benzene.

⚛The chemistry

Benzene has a planar ring of six carbons with delocalised pi electrons, which makes it very stable and gives it a high octane number. Its stability means it reacts by substitution, not addition.

⚙How it is made

Extracted from reformate or pyrolysis gasoline using sulpholane or similar solvent extraction, then distilled.

▶How it works

It is a chemical building block rather than a fuel. Reactions include alkylation with ethylene to make ethylbenzene.

▣Storage, loading and inspection

Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading. Benzene needs closed loading and vapour recovery.

★Why it matters in the Gulf

Benzene is produced at aromatics complexes in the Gulf for styrene and other chemicals. Producer details and volumes are not stated.

Key molecules

Standards and specifications

ASTM D2359 and D4734ASTM benzene specifications; confirm the exact grade with the supplier.
EU CLP and REACHClassified as a category 1A carcinogen.

Hazards

UN1114Class Class 3 flammable liquid, PG II

Carcinogenic (IARC Group 1), flammable; exposure limit about 1 ppm 8-hour in many countries.

How it is traded

Units

Metric tonnes

Benchmarks

Platts Benzene FOB Korea, CIF ARA, FOB USG; ICIS benzene

Typical cargo

Parcel tankers 1,000 to 10,000 mt

Incoterms

FOB, CFR, CIF; DAP for packaged or road deliveries

Notes

Sold on contract with benzene purity 99.9% min.

Refineries that make it: our suggestions

20 listed refineries make this product, 7 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.

See all 20 on the map

Did you know

💡 Michael Faraday isolated benzene in 1825 (Wikipedia).

💡 The EU limits benzene in petrol to 1 percent by volume (Wikipedia).

Test yourself on Benzene

Question 1 of 3 · Score 0 · Streak 0

Formula?

More in this group

Sources

Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.