Solvents and chemicals
Hexane (n-Hexane, Commercial Hexane)
Hexane is a light, non-polar hydrocarbon solvent boiling around 69 C. It is the standard solvent for extracting edible oils from seeds.
← All productsAlso called: n-hexane, Hexanes, Food-grade hexane, Extraction solvent
- Flash pointAround -26 C
- Density655 to 670 kg/m³
- ViscosityAbout 0.3 mPa.s at 20 C
- Cold flowBelow -90 C
- SulphurBelow 1 ppm for food grade
- Boiling range64 to 70 °C

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Very thin Water-thin or thinner. Ripples run fast and ring for a long time.
Typical viscosity from the dataAbout 0.3 mPa.s at 20 C
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Colourless, clear, gasoline-like odour
Where it is used
- Edible oil extraction
- Adhesive and glue solvent
- Degreasing
- Laboratory solvent
Handling and safety
- Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.
- Highly flammable; vapour heavier than air; neurotoxic; aquatic toxicity.
Typical properties
- Appearance
- Colourless, clear, gasoline-like odour
- Density at 15 °C
- 655 to 670 kg/m³
- Boiling range
- 64 to 70 °C
- Flash point
- Around -26 C
- Viscosity
- About 0.3 mPa.s at 20 C
- Pour point
- Below -90 C
- Typical sulphur
- Below 1 ppm for food grade
◉What it is
Hexane is a six-carbon alkane, C6H14. The commercial product is a mixture of isomers with about 50 percent n-hexane (Wikipedia), obtained from the 65 to 70 C fraction of crude oil or naphtha. It is cheap, non-polar and nearly inert, so it is widely used to extract canola, soybean and sunflower oil from seeds. n-Hexane is also neurotoxic: the body converts it to 2,5-hexanedione, which damages nerves (Wikipedia). Workplace exposure limits are strict.
⬡What it is made of
C6 isomers: n-hexane, 2- and 3-methylpentane, methylcyclopentane.
⚛The chemistry
Hexane is a saturated hydrocarbon with only C-C and C-H bonds, so it is non-polar, inert and dissolves fats and oils through weak dispersion forces. Its low boiling point lets it be removed from oil by gentle heating.
⚙How it is made
Separated by fractionation of straight-run naphtha or reformate raffinate, then hydrotreated and sometimes treated for aromatics (benzene) removal.
▶How it works
As solvent it dissolves oil but not water. After extraction it is distilled off and reused.
▣Storage, loading and inspection
Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.
★Why it matters in the Gulf
Hexane is used in edible oil extraction. Regional demand and supply details are not stated.
Key molecules
Standards and specifications
| ASTM D1836 | Specification for commercial hexanes. |
|---|---|
| EU Directive 2009/32/EC | Extraction solvents used in foodstuffs. |
Hazards
Highly flammable; vapour heavier than air; neurotoxic; aquatic toxicity.
How it is traded
Units
Metric tonnes; ISO tanks; drums
Benchmarks
Contract; linked to naphtha
Typical cargo
ISO tank, parcel tanker
Incoterms
FOB, CFR, CIF; DAP for packaged or road deliveries
Notes
Food-grade specification with benzene limits.
Refineries that make it: our suggestions
7 listed refineries make this product, 3 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Khangiran Gas Refinery (Shahid Hasheminejad)
Iran · Not publishedGulf locationOperatingExport access
- 3Sepahan Oil Company
Iran · Not publishedGulf locationOperatingExport access
- 4Kirishi Refinery (KINEF)
Russia · 402,000 bpdOperatingDeep conversion
- 5Attock Refinery Limited (Morgah)
Pakistan · 53,400 bpdOperatingExport access
- 6Yaroslavl Mendeleev Experimental Oil and Lubricants Plant
Russia · 9,600 bpdOperating
Did you know
💡 The commercial product boils at 65 to 70 C and is only about half n-hexane (Wikipedia).
💡 Hexanes are used to extract cooking oils such as soybean and canola oil from seeds (Wikipedia).
Test yourself on Hexane (n-Hexane, Commercial Hexane)
Boiling point?
More in this group
- White Spirit
- Benzene
- Toluene
- Mixed Xylene
- Para-Xylene (PX)
- MTBE (Methyl Tert-Butyl Ether)
- Ethylene (Refinery and Petrochemical Stream)
- Propylene (Refinery and Petrochemical Stream)
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.



