Skip to content

Solvents and chemicals

MTBE (Methyl Tert-Butyl Ether)

MTBE is a gasoline additive made from methanol and isobutylene that raises octane number. It has a boiling point of about 55 C.

← All productsAlso called: Methyl tertiary-butyl ether, Gasoline oxygenate

  • Flash point-33 C
  • Density740 to 745 kg/m³
  • ViscosityAbout 0.35 mPa.s at 20 C
  • Cold flowFreezing point -109 C
  • SulphurBelow 10 ppm
  • Boiling range55 to 56 °C
Typical colour, laboratory glass
Laboratory glass sample of MTBE (Methyl Tert-Butyl Ether), in its typical colour
A sample of MTBE (Methyl Tert-Butyl Ether) in laboratory glass on a dark studio background, so the colour is easy to judge.
Colour scale
The colours MTBE (Methyl Tert-Butyl Ether) is known to show.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.

Stir the liquid to feel how thick it is

Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.

Very thin
Colour follows the typical colour of MTBE (Methyl Tert-Butyl Ether).
Thin and looseThick and heavy

Very thin Water-thin or thinner. Ripples run fast and ring for a long time.

Typical viscosity from the dataAbout 0.35 mPa.s at 20 C

Stir speed
0 px/s
Liquid movement
0%
Settled after
-
Surface
Still

The class is a guide for feel. The viscosity figure shown is the one in the specification data.

How it looks

Clear, colourless, ether-like odour

Where it is used

  • Gasoline octane blending component
  • Solvent in labs
  • Medical use (gallstones)

Handling and safety

  • Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.
  • Highly flammable; water contamination risk.

Typical properties

Appearance
Clear, colourless, ether-like odour
Density at 15 °C
740 to 745 kg/m³
Boiling range
55 to 56 °C
Flash point
-33 C
Viscosity
About 0.35 mPa.s at 20 C
Pour point
Freezing point -109 C
Typical sulphur
Below 10 ppm

◉What it is

MTBE is C5H12O, a volatile, flammable, colourless liquid used as an octane booster and oxygenate (Wikipedia). It is made from methanol and isobutylene. It has been used in US gasoline since 1979 as a replacement for lead. In the US, groundwater contamination led to state bans and a shift to ethanol. MTBE remains widely used in Asia, the Middle East and Europe.

⬡What it is made of

Single compound, purity above 98%.

⚛The chemistry

The ether oxygen adds oxygen content and raises octane to about RON 117 (typical). The tertiary butyl group is bulky, making the molecule resistant to knocking.

⚙How it is made

Isobutylene from FCC or steam cracker or from TBA dehydration reacts with methanol over an acid ion exchange resin at 50 to 90 C.

▶How it works

In blend, MTBE raises RON and provides oxygen for cleaner combustion.

▣Storage, loading and inspection

Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.

★Why it matters in the Gulf

MTBE is made where methanol and isobutylene are available. Wikipedia names Saudi Aramco as the world's largest producer. Other Gulf producers are not stated.

Key molecules

Standards and specifications

EN 228European petrol specification, which allows ethers of five or more carbon atoms up to a limit.
ASTM D4814US gasoline specification.

Hazards

UN2398Class Class 3 flammable liquid, PG II

Highly flammable; water contamination risk.

How it is traded

Units

Metric tonnes

Benchmarks

Price assessments for MTBE in Singapore, Northwest Europe and the Arab Gulf

Typical cargo

Parcels of 2,000 to 40,000 mt

Incoterms

FOB, CFR, CIF; DAP for packaged or road deliveries

Notes

Parcel sizes vary.

Did you know

💡 MTBE has been used in US gasoline since 1979, replacing tetraethyl lead as an antiknock additive (Wikipedia).

💡 MTBE gives water an unpleasant taste below about 30 micrograms per litre (Wikipedia).

Test yourself on MTBE (Methyl Tert-Butyl Ether)

Question 1 of 3 · Score 0 · Streak 0

MTBE is made from?

More in this group

Sources

Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.