Skip to content

Solvents and chemicals

White Spirit

White spirit is a petroleum solvent of C7 to C12 hydrocarbons used as paint thinner and degreaser. It comes in low flash, regular and high flash grades.

← All productsAlso called: Mineral spirits, Stoddard solvent, Paint thinner, Naphtha solvent (type 0/1/2/3), Odourless mineral spirits

  • Flash point21 to 30 C (low flash); 31 to 54 C (regular); above 55 C (high flash)
  • Density765 to 795 kg/m³
  • ViscosityAbout 1 mm2/s at 20 C
  • Cold flowBelow -40 C
  • SulphurBelow 0.005 to 0.05% typical
  • Boiling range130 to 200 °C
Typical colour, laboratory glass
Laboratory glass sample of White Spirit, in its typical colour
A sample of White Spirit in laboratory glass on a dark studio background, so the colour is easy to judge.
Reference photograph
How White Spirit is stored and moved in practice.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.

Stir the liquid to feel how thick it is

Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.

Thin
Colour follows the typical colour of White Spirit.
Thin and looseThick and heavy

Thin Light and free flowing. Waves travel quickly and fade slowly.

Typical viscosity from the dataAbout 1 mm2/s at 20 C

Stir speed
0 px/s
Liquid movement
0%
Settled after
-
Surface
Still

The class is a guide for feel. The viscosity figure shown is the one in the specification data.

How it looks

Water-white and thin, with a mild hydrocarbon smell. Colour is measured on the Saybolt scale, and any haze, yellow tint or strong odour counts against it.

Where it is used

  • Paint thinner
  • Degreasing and cleaning
  • Dry cleaning
  • Printing inks
  • Aerosols

Handling and safety

  • Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.
  • Vapour harmful; chronic exposure can affect the nervous system. Flammable.

Typical properties

Appearance
Colourless clear liquid
Density at 15 °C
765 to 795 kg/m³
Boiling range
130 to 200 °C
Flash point
21 to 30 C (low flash); 31 to 54 C (regular); above 55 C (high flash)
Viscosity
About 1 mm2/s at 20 C
Pour point
Below -40 C
Typical sulphur
Below 0.005 to 0.05% typical

◉What it is

White spirit is a clear, volatile hydrocarbon mixture of aliphatic and alicyclic compounds with 7 to 12 carbon atoms. It is a distillation cut between naphtha and kerosene. Grades differ in flash point: low flash 21 to 30 C, regular 31 to 54 C and high flash above 55 C. Types 1 to 3 describe how it is treated: hydrodesulphurised, solvent extracted or hydrogenated. Dearomatised grades are used where odour and toxicity matter. Stoddard solvent is a related grade developed in 1924 as a safer dry-cleaning solvent.

⬡What it is made of

C7 to C12 paraffins, naphthenes and 0 to 20% aromatics (dearomatised below 1%).

⚛The chemistry

The molecules are non-polar, so white spirit dissolves oils, resins and alkyd paints but not water. Removing aromatics reduces odour and toxicity.

⚙How it is made

A straight-run kerosene or naphtha cut is hydrotreated to remove sulphur and aromatics, then fractionated to the required boiling range.

▶How it works

It dissolves binders and evaporates at a controlled rate set by its boiling range. Higher boiling grades evaporate more slowly.

▣Storage, loading and inspection

Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.

★Why it matters in the Gulf

Solvent trade through Jebel Ali to Africa and South Asia is common, but Gulf production sources are not stated.

Key molecules

Standards and specifications

BS 245 and DIN 51632UK and German white spirit standards.
ASTM D235US specification for mineral spirits (petroleum spirits).

Hazards

UN1268 (petroleum distillates, n.o.s.) or UN1300 (turpentine substitute)Class Class 3 flammable liquid, packing group III (low flash grades may be packing group II)

Vapour harmful; chronic exposure can affect the nervous system. Flammable.

How it is traded

Units

Metric tonnes; drums; IBCs

Benchmarks

Contract; reference to naphtha and kerosene

Typical cargo

Parcels of 1,000 to 10,000 mt; ISO tanks; drums

Incoterms

FOB, CFR, CIF; DAP for packaged or road deliveries

Notes

Price follows naphtha with premium for dearomatised grades.

Refineries that make it: our suggestions

7 listed refineries make this product, 3 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.

See all 7 on the map

Did you know

💡 The name covers several grades, from low flash (21 to 30 C) to high flash (above 55 C).

💡 Stoddard solvent was developed in 1924 as a less flammable dry-cleaning fluid (Wikipedia).

Test yourself on White Spirit

Question 1 of 3 · Score 0 · Streak 0

Carbon range?

See the PST specification page

More in this group

Sources

Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.