Middle distillates
Marine Diesel DMB
DMB is an ISO 8217 distillate marine fuel that may contain traces of residual oil. It has a higher allowed viscosity and density than DMA.
← Todos los productosTambién llamado: DMB, Marine diesel oil (MDO), Marine diesel
- Punto de inflamaciónMin 60 C
- Densidad800 to 900 kg/m³
- ViscosidadMax 11.0 mm2/s at 40 C
- Flujo en fríoWinter max 0 C; summer max 6 C (ISO 8217)
- AzufreMax 0.50% globally under MARPOL; 0.10% in ECAs where used
- Rango de ebullición170 to 400 °C


Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0. Fotografía: elaborada a partir de una foto de referencia de Грищук ЮН, CC BY-SA 3.0, vía Wikimedia Commons.
Agite el líquido para sentir su espesor
Mueva el ratón o un dedo sobre el líquido. Mantenga pulsado y arrastre para agitar con más fuerza. Teclado: las flechas agitan, la barra espaciadora sacude.
Fino Ligero y fluido. Las ondas se propagan rápido y se apagan despacio.
Viscosidad típica según los datosMax 11.0 mm2/s at 40 C
- Velocidad de agitación
- 0 px/s
- Movimiento del líquido
- 0%
- Se calma tras
- -
- Superficie
- Quieto
La clase es solo una guía de sensación. La viscosidad indicada es la de los datos de la especificación.
Aspecto
Dark to clear; may be hazy
Dónde se utiliza
- Ships with older medium-speed engines
- Auxiliary engines and boilers
- Tugs and fishing vessels
Manipulación y seguridad
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Marine fuel flash point min 60 C.
Propiedades típicas
- Aspecto
- Dark to clear; may be hazy
- Densidad a 15 °C
- 800 to 900 kg/m³
- Rango de ebullición
- 170 to 400 °C
- Punto de inflamación
- Min 60 C
- Viscosidad
- Max 11.0 mm2/s at 40 C
- Punto de fluidez
- Winter max 0 C; summer max 6 C (ISO 8217)
- Azufre típico
- Max 0.50% globally under MARPOL; 0.10% in ECAs where used
◉What it is
DMB is the second distillate grade in the ISO 8217 marine fuel standard. It is often called marine diesel oil (MDO). Unlike DMA, it is allowed to contain a small amount of residual material because it can be contaminated by residual oil in the supply chain. It is generally cloudy and slightly darker than DMA. It is mainly used by ships with older engines that tolerate a higher viscosity limit of 11 mm2/s at 40 C and by ships that do not need to burn the cleanest grade.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛La química
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Distilled gasoil blended with small amounts of heavier gasoil or cutter streams.
▶How it works
Burns in diesel engines, sometimes requires slight heating in cold climates. Higher viscosity and density than DMA make it cheaper.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Distillate grades are available at Fujairah, but DMB-specific availability is not stated.
Moléculas clave
Normas y especificaciones
| ISO 8217 | DMB limits: viscosity 11.0 mm2/s max at 40 C, density 900 kg/m3 max, flash point 60 C min. |
|---|---|
| MARPOL Annex VI | Sulphur limits (0.50% global, 0.10% in ECAs). |
Peligros
Marine fuel flash point min 60 C.
Cómo se comercializa
Units
Metric tonnes
Benchmarks
Platts MGO-based assessments with a small discount to DMA
Typical cargo
Barge or tanker deliveries
Incoterms
As MGO
Notes
DMB trades less than DMA because the DMA grade has become the standard.
Refinerías que lo producen: nuestras sugerencias
152 refinerías de la lista producen este producto, 42 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcceso de exportación
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcceso de exportación
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAcceso de exportación
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcceso de exportación
Terminales que lo manipulan
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
¿Sabía que…?
💡 DMB is sometimes simply called MDO.
💡 DMB is allowed a higher viscosity (11.0 mm2/s) than DMA (6.0 mm2/s).
Póngase a prueba sobre Marine Diesel DMB
What is the max viscosity of DMB at 40 C?
Más de este grupo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fuentes
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Fujairah (Wikipedia)
Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.







