Saltar al contenido

Middle distillates

Jet A-1

Jet A-1 is the standard kerosene-type fuel for civil aircraft turbines worldwide outside the United States. It has a freezing point of minus 47 C and a flash point of at least 38 C.

← Todos los productosTambién llamado: Jet fuel, Aviation turbine fuel, ATF, Kerosene (jet)

  • Punto de inflamación38 °C
  • Densidad775 to 840 kg/m³
  • ViscosidadMax 8.0 mm2/s at minus 20 C (typical limit in the specification)
  • Flujo en fríoFreezing point max minus 47 C
  • AzufreUp to 0.30 % m/m (specification limit); typically much lower
  • Rango de ebullición145 to 300 °C
Color típico, vidrio de laboratorio
Muestra de Jet A-1 en un vaso de laboratorio, con su color típico
Una muestra de Jet A-1 en vidrio de laboratorio sobre un fondo oscuro de estudio, para apreciar bien el color.
Fotografía de referencia
Cómo se almacena y se mueve Jet A-1 en la práctica.

Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0.

Agite el líquido para sentir su espesor

Mueva el ratón o un dedo sobre el líquido. Mantenga pulsado y arrastre para agitar con más fuerza. Teclado: las flechas agitan, la barra espaciadora sacude.

Fino
El color corresponde al color típico de Jet A-1.
Fino y sueltoEspeso y pesado

Fino Ligero y fluido. Las ondas se propagan rápido y se apagan despacio.

Viscosidad típica según los datosMax 8.0 mm2/s at minus 20 C (typical limit in the specification)

Velocidad de agitación
0 px/s
Movimiento del líquido
0%
Se calma tras
-
Superficie
Quieto

La clase es solo una guía de sensación. La viscosidad indicada es la de los datos de la especificación.

Aspecto

Clear and bright, colourless to pale straw. Free of visible water, dirt and haze. Colour is measured on the Saybolt scale: +30 is water-white, and a fuel that has turned yellow or dark has usually been contaminated or has aged.

Dónde se utiliza

  • Commercial aviation turbine fuel
  • Blending with sustainable aviation fuel (SAF)

Manipulación y seguridad

  • Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).
  • Flammable; static buildup in handling; antistatic additive used.

Propiedades típicas

Aspecto
Clear, colourless to straw
Densidad a 15 °C
775 to 840 kg/m³
Rango de ebullición
145 to 300 °C
Punto de inflamación
38 °C
Viscosidad
Max 8.0 mm2/s at minus 20 C (typical limit in the specification)
Punto de fluidez
Freezing point max minus 47 C
Azufre típico
Up to 0.30 % m/m (specification limit); typically much lower

◉What it is

Jet A-1 is a carefully controlled kerosene cut with a carbon range of about 8 to 16. It must meet tight limits for freezing point, flash point, thermal stability and cleanliness because it flows through aircraft fuel systems at altitude. It is made by distilling and treating crude oil, and may include approved additives such as antistatic additive, corrosion inhibitor and icing inhibitor. Jet A-1 contrasts with the US Jet A, which has a slightly higher freezing point of minus 40 C. Sustainable aviation fuel can be blended in up to approved limits.

⬡What it is made of

C8 to C16 paraffins, naphthenes and aromatics.

⚛La química

Kerosene molecules are medium-length alkanes and cycloalkanes with some aromatics. Straight chains of this length would freeze at low temperature, so the freezing point is controlled by composition. Aromatics help seals swell but form soot, so they are limited. Sulphur is limited to 0.30 percent mass by specification.

⚙How it is made

Straight-run kerosene from the crude distillation unit, treated by hydrotreating or Merox sweetening, with additives. Hydrocracker kerosene is also used.

▶How it works

A low freezing point keeps fuel flowing at altitude, the flash point ensures safe ground handling, and thermal stability prevents deposits in hot engine sections. Energy per kilogram is high at roughly 43 MJ/kg.

▣Storage, loading and inspection

Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).

★Why it matters in the Gulf

The Gulf is a major jet fuel hub, with supply from regional refineries and storage at Fujairah. Wikipedia reports about 10 million cubic metres of refined-product storage in the Fujairah oil industry zone. Verified jet fuel volumes were not retrieved.

Moléculas clave

Normas y especificaciones

DEF STAN 91-091UK Ministry of Defence specification for Jet A-1.
ASTM D1655Standard specification for aviation turbine fuels (Jet A and Jet A-1).
IATA Guidance Material (Kerosene Type)Industry guidance for aviation fuel quality.

Peligros

UN1863 (fuel, aviation, turbine engine)Clase Class 3 flammable liquid, packing group III

Flammable; static buildup in handling; antistatic additive used.

Cómo se comercializa

Units

Barrels or metric tonnes

Benchmarks

Platts Jet Kero FOB Arab Gulf, Singapore, NWE

Typical cargo

LR1 or MR tankers 35,000 to 75,000 tonnes

Incoterms

FOB, CFR, DAP at airport

Notes

Release certificate and fuel quality must match DEF STAN 91-091 or ASTM D1655.

Refinerías que lo producen: nuestras sugerencias

76 refinerías de la lista producen este producto, 26 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.

Ver los 76 en el mapa

Terminales que lo manipulan

¿Sabía que…?

💡 Jet A-1 has a freezing point of minus 47 C, while US Jet A is minus 40 C.

💡 Jet A-1 requires an antistatic additive; Jet A does not (Wikipedia).

Póngase a prueba sobre Jet A-1

Pregunta 1 de 3 · Puntuación 0 · Racha 0

Jet A-1 maximum freezing point is:

Ver la página de especificaciones de PST

Más de este grupo

Fuentes

Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.