پرش به محتوا

Middle distillates

Marine Diesel DMB

DMB is an ISO 8217 distillate marine fuel that may contain traces of residual oil. It has a higher allowed viscosity and density than DMA.

← همهٔ محصولاتنام‌های دیگر: DMB, Marine diesel oil (MDO), Marine diesel

  • نقطهٔ اشتعالMin 60 C
  • چگالی800 to 900 kg/m³
  • گرانرویMax 11.0 mm2/s at 40 C
  • جریان در سرماWinter max 0 C; summer max 6 C (ISO 8217)
  • گوگردMax 0.50% globally under MARPOL; 0.10% in ECAs where used
  • بازهٔ جوش170 to 400 °C
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ Marine Diesel DMB در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از Marine Diesel DMB در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی Marine Diesel DMB در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0. عکس: ساخته‌شده از روی عکس مرجع از Грищук ЮН, CC BY-SA 3.0, از طریق Wikimedia Commons.

مایع را هم بزنید تا غلظت آن را حس کنید

ماوس یا انگشت را روی مایع حرکت دهید. برای هم‌زدن شدیدتر، فشار دهید و بکشید. صفحه‌کلید: کلیدهای جهت‌دار هم می‌زنند و Space تکان می‌دهد.

رقیق
رنگ بر اساس رنگ معمول Marine Diesel DMB است.
رقیق و روانغلیظ و سنگین

رقیق سبک و روان. موج‌ها سریع حرکت می‌کنند و دیر محو می‌شوند.

گرانروی معمول بر اساس داده‌هاMax 11.0 mm2/s at 40 C

سرعت هم‌زدن
0 px/s
حرکت مایع
0%
آرام‌گرفتن پس از
-
سطح
ساکن

این رده فقط راهنمای حس مایع است. عدد گرانروی نمایش‌داده‌شده همان است که در داده‌های مشخصات آمده.

ظاهر محصول

Dark to clear; may be hazy

کاربردها

  • Ships with older medium-speed engines
  • Auxiliary engines and boilers
  • Tugs and fishing vessels

جابه‌جایی و ایمنی

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Marine fuel flash point min 60 C.

ویژگی‌های معمول

ظاهر
Dark to clear; may be hazy
چگالی در 15 °C
800 to 900 kg/m³
بازهٔ جوش
170 to 400 °C
نقطهٔ اشتعال
Min 60 C
گرانروی
Max 11.0 mm2/s at 40 C
نقطهٔ ریزش
Winter max 0 C; summer max 6 C (ISO 8217)
گوگرد معمول
Max 0.50% globally under MARPOL; 0.10% in ECAs where used

◉What it is

DMB is the second distillate grade in the ISO 8217 marine fuel standard. It is often called marine diesel oil (MDO). Unlike DMA, it is allowed to contain a small amount of residual material because it can be contaminated by residual oil in the supply chain. It is generally cloudy and slightly darker than DMA. It is mainly used by ships with older engines that tolerate a higher viscosity limit of 11 mm2/s at 40 C and by ships that do not need to burn the cleanest grade.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛شیمی

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled gasoil blended with small amounts of heavier gasoil or cutter streams.

▶How it works

Burns in diesel engines, sometimes requires slight heating in cold climates. Higher viscosity and density than DMA make it cheaper.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Distillate grades are available at Fujairah, but DMB-specific availability is not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

ISO 8217DMB limits: viscosity 11.0 mm2/s max at 40 C, density 900 kg/m3 max, flash point 60 C min.
MARPOL Annex VISulphur limits (0.50% global, 0.10% in ECAs).

خطرات

UN1202 (diesel fuel or gas oil)کلاس Class 3, packing group III (when shipped as dangerous goods)

Marine fuel flash point min 60 C.

نحوهٔ معامله

Units

Metric tonnes

Benchmarks

Platts MGO-based assessments with a small discount to DMA

Typical cargo

Barge or tanker deliveries

Incoterms

As MGO

Notes

DMB trades less than DMA because the DMA grade has become the standard.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

152 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 42 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 152 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 DMB is sometimes simply called MDO.

💡 DMB is allowed a higher viscosity (11.0 mm2/s) than DMA (6.0 mm2/s).

خودتان را در مورد Marine Diesel DMB بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What is the max viscosity of DMB at 40 C?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.