Middle distillates
Gasoil 500 ppm
Gasoil 500 ppm is a middle distillate with sulphur limited to 500 ppm (0.05% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.
← همهٔ محصولاتنامهای دیگر: Gasoil 0.05% S, Diesel 500 ppm, Low sulphur gasoil 0.05%
- نقطهٔ اشتعالAbove 55 C typical (min 52 to 60 C depending on contract)
- چگالی820 to 860 kg/m³
- گرانروی2.0 to 4.5 mm2/s at 40 C typical
- گوگردMax 500 ppm (0.05% m/m)
- بازهٔ جوش170 to 375 °C
- خطرUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


منبع تصاویر نمونههای شیشهای آزمایشگاهی از روی عکسهای مرجع در ویکیمدیا کامنز ساخته شدهاند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0. عکس: ساختهشده از روی عکس مرجع از DanTD, CC BY-SA 3.0, از طریق Wikimedia Commons.
مایع را هم بزنید تا غلظت آن را حس کنید
ماوس یا انگشت را روی مایع حرکت دهید. برای همزدن شدیدتر، فشار دهید و بکشید. صفحهکلید: کلیدهای جهتدار هم میزنند و Space تکان میدهد.
رقیق سبک و روان. موجها سریع حرکت میکنند و دیر محو میشوند.
گرانروی معمول بر اساس دادهها2.0 to 4.5 mm2/s at 40 C typical
- سرعت همزدن
- 0 px/s
- حرکت مایع
- 0%
- آرامگرفتن پس از
- -
- سطح
- ساکن
این رده فقط راهنمای حس مایع است. عدد گرانروی نمایشدادهشده همان است که در دادههای مشخصات آمده.
ظاهر محصول
Clear and bright, pale yellow to light amber. A slight dark tint is normal at the top of the range. Haze means water, and a dark or brown fuel means contamination, oxidation or a heavy cut. Some markets dye diesel red for off-road or tax reasons.
کاربردها
- Road diesel in markets that still allow this sulphur level
- Power generation and industrial burners
- Mining and construction equipment
- Agricultural and fishing vessels
جابهجایی و ایمنی
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
ویژگیهای معمول
- ظاهر
- Clear to pale yellow, may be dyed by local rule
- چگالی در 15 °C
- 820 to 860 kg/m³
- بازهٔ جوش
- 170 to 375 °C
- نقطهٔ اشتعال
- Above 55 C typical (min 52 to 60 C depending on contract)
- گرانروی
- 2.0 to 4.5 mm2/s at 40 C typical
- نقطهٔ ریزش
- Varies by season
- گوگرد معمول
- Max 500 ppm (0.05% m/m)
◉What it is
Gasoil 500 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 2 to Euro 3 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Traditional export grade for markets without 10 ppm rules.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛شیمی
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.
▶How it works
Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners have long exported gasoil of 500 ppm sulphur or higher to East Africa, South Asia and the Red Sea region, with storage and blending at Fujairah. Many importers are tightening limits, so this grade is likely shrinking. Volumes are not stated.
مولکولهای کلیدی




استانداردها و مشخصات
| EN 590 (older editions) | Earlier European diesel sulphur limits were 350 mg/kg until the end of 2004, then 50 mg/kg, then 10 mg/kg from 2009. A 500 ppm level belongs to older vehicle-standard generations. |
|---|---|
| ASTM D975 S500 | US diesel grade with 500 ppm maximum sulphur. |
| Contract or national specification | Many importing countries set their own limits. |
خطرات
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
نحوهٔ معامله
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price
Typical cargo
Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.
پالایشگاههایی که آن را تولید میکنند: پیشنهاد ما
152 پالایشگاه فهرستشده این محصول را تولید میکنند که 42 تا از آنها در خلیج فارس، ایران و عراق است. پالایشگاههای خلیج فارس را اول میآوریم، سپس واحدهای در حال بهرهبرداری، و بعد بر اساس ظرفیت.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionدسترسی به صادرات
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingدسترسی به صادرات
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionدسترسی به صادرات
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionدسترسی به صادرات
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingدسترسی به صادرات
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingدسترسی به صادرات
ترمینالهایی که آن را جابهجا میکنند
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
میدانستید؟
💡 500 ppm equals 0.05 percent by mass.
💡 Many importing countries have been moving to 50 ppm or 10 ppm limits.
خودتان را در مورد Gasoil 500 ppm بسنجید
What is the sulphur limit in Gasoil 500 ppm?
موارد بیشتر در این گروه
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
منابع
با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق میکند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.



