پرش به محتوا

Middle distillates

Gasoil 50 ppm

Gasoil 50 ppm is a middle distillate with sulphur limited to 50 ppm (0.005% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.

← همهٔ محصولاتنام‌های دیگر: Diesel 50 ppm, Euro 4 diesel, Gasoil 0.005% S

  • نقطهٔ اشتعالAbove 55 C typical (min 52 to 60 C depending on contract)
  • چگالی820 to 860 kg/m³
  • گرانروی2.0 to 4.5 mm2/s at 40 C typical
  • گوگردMax 50 ppm (0.005% m/m)
  • بازهٔ جوش170 to 375 °C
  • خطرUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ Gasoil 50 ppm در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از Gasoil 50 ppm در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی Gasoil 50 ppm در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0. عکس: ساخته‌شده از روی عکس مرجع از DanTD, CC BY-SA 3.0, از طریق Wikimedia Commons.

مایع را هم بزنید تا غلظت آن را حس کنید

ماوس یا انگشت را روی مایع حرکت دهید. برای هم‌زدن شدیدتر، فشار دهید و بکشید. صفحه‌کلید: کلیدهای جهت‌دار هم می‌زنند و Space تکان می‌دهد.

رقیق
رنگ بر اساس رنگ معمول Gasoil 50 ppm است.
رقیق و روانغلیظ و سنگین

رقیق سبک و روان. موج‌ها سریع حرکت می‌کنند و دیر محو می‌شوند.

گرانروی معمول بر اساس داده‌ها2.0 to 4.5 mm2/s at 40 C typical

سرعت هم‌زدن
0 px/s
حرکت مایع
0%
آرام‌گرفتن پس از
-
سطح
ساکن

این رده فقط راهنمای حس مایع است. عدد گرانروی نمایش‌داده‌شده همان است که در داده‌های مشخصات آمده.

ظاهر محصول

Clear to pale yellow, may be dyed by local rule

کاربردها

  • Road diesel in markets that still allow this sulphur level
  • Power generation and industrial burners
  • Mining and construction equipment
  • Agricultural and fishing vessels

جابه‌جایی و ایمنی

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

ویژگی‌های معمول

ظاهر
Clear to pale yellow, may be dyed by local rule
چگالی در 15 °C
820 to 860 kg/m³
بازهٔ جوش
170 to 375 °C
نقطهٔ اشتعال
Above 55 C typical (min 52 to 60 C depending on contract)
گرانروی
2.0 to 4.5 mm2/s at 40 C typical
نقطهٔ ریزش
Varies by season
گوگرد معمول
Max 50 ppm (0.005% m/m)

◉What it is

Gasoil 50 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 4 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Intermediate grade between 500 ppm and 10 ppm.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛شیمی

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.

▶How it works

Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Gulf refiners export 50 ppm gasoil to importers whose standards sit between 500 ppm and 10 ppm, with storage and blending at Fujairah. Volumes are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

EN 590 (older editions)European road diesel was limited to 50 mg/kg sulphur from 2005, before the 10 mg/kg limit from 2009 (Wikipedia).
ASTM D975 S15 and S500US grades with 15 ppm and 500 ppm maximum sulphur; there is no US 50 ppm grade.
Contract or national specificationMany importing countries set their own limits.

خطرات

UN1202کلاس Class 3 flammable liquid, packing group III (ADR/IMDG)

Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

نحوهٔ معامله

Units

Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.

Benchmarks

Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price

Typical cargo

Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes

Incoterms

FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.

Notes

Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

152 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 42 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 152 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 50 ppm equals 0.005 percent by mass.

💡 The EU moved from 50 mg/kg to 10 mg/kg diesel sulphur from 2009 (Wikipedia).

خودتان را در مورد Gasoil 50 ppm بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What is the sulphur limit in Gasoil 50 ppm?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.