پرش به محتوا

Middle distillates

Ultra Low Sulphur Diesel (ULSD)

ULSD is diesel with sulphur at or below 15 ppm in the United States and 10 ppm in Europe. The term is used for any modern road diesel with near-zero sulphur.

← همهٔ محصولاتنام‌های دیگر: ULSD, ULSD 15 ppm, Ultra-low-sulfur diesel, Diesel S15

  • نقطهٔ اشتعالAbove 52 C (ASTM D975) or 55 C (EN 590)
  • چگالی820 to 860 kg/m³
  • گرانروی1.9 to 4.1 mm2/s at 40 C (ASTM D975 No. 2); 2.0 to 4.5 (EN 590)
  • گوگردMax 15 ppm (US) or 10 ppm (EN 590)
  • بازهٔ جوش170 to 370 °C
  • خطرUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ Ultra Low Sulphur Diesel (ULSD) در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از Ultra Low Sulphur Diesel (ULSD) در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی Ultra Low Sulphur Diesel (ULSD) در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0. عکس: ساخته‌شده از روی عکس مرجع از DanTD, CC BY-SA 3.0, از طریق Wikimedia Commons.

Ultra Low Sulphur Diesel (ULSD) در دمای عادی جامد است، بنابراین مایعی برای هم‌زدن وجود ندارد. 1.9 to 4.1 mm2/s at 40 C (ASTM D975 No. 2); 2.0 to 4.5 (EN 590)

ظاهر محصول

Clear to pale yellow

کاربردها

  • Road transport diesel
  • Off-road machinery in regulated markets
  • Blending stock for renewable diesel
  • Rail and generator fuel

جابه‌جایی و ایمنی

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

ویژگی‌های معمول

ظاهر
Clear to pale yellow
چگالی در 15 °C
820 to 860 kg/m³
بازهٔ جوش
170 to 370 °C
نقطهٔ اشتعال
Above 52 C (ASTM D975) or 55 C (EN 590)
گرانروی
1.9 to 4.1 mm2/s at 40 C (ASTM D975 No. 2); 2.0 to 4.5 (EN 590)
نقطهٔ ریزش
Varies by season and grade
گوگرد معمول
Max 15 ppm (US) or 10 ppm (EN 590)

◉What it is

Ultra low sulphur diesel is the clean road diesel required in most developed markets. In the United States the ASTM D975 S15 grade limits sulphur to 15 ppm, while in Europe the equivalent is EN 590 at 10 ppm. The low sulphur level is needed for diesel particulate filters and selective catalytic reduction systems to function. In trade, ULSD usually means the 10 ppm export grade unless a specification says otherwise. Many buyers specify the exact standard, such as EN 590 or ASTM D975 S15, rather than rely on the label alone.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛شیمی

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Made by deep hydrodesulphurisation of straight-run and cracked gasoil in a hydrotreater at about 330 to 400 C and 40 to 80 bar hydrogen pressure. Lubricity additives are added afterwards because the severe treatment removes natural lubricants.

▶How it works

Low sulphur lets exhaust aftertreatment devices work without poisoning and cuts sulphur dioxide and particulate matter. Because treatment strips natural lubricity, standards such as ASTM D975 and EN 590 set a maximum wear scar from a high-frequency reciprocating rig (HFRR) test, and suppliers dose lubricity additive to pass it.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Gulf refineries export hydrotreated diesel that meets 10 ppm specifications, and Fujairah storage lets traders hold ULSD for onward sale to East Africa, South Asia and Europe. Individual refinery grades are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

ASTM D975US specification; S15 grade has 15 ppm maximum sulphur
EN 590European specification; 10 ppm maximum sulphur
ASTM D6751Biodiesel blend stock standard in the US

خطرات

UN1202کلاس Class 3 flammable liquid, packing group III (ADR/IMDG)

Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

نحوهٔ معامله

Units

Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.

Benchmarks

Platts ULSD assessments (CIF Northwest Europe, FOB Arab Gulf 10 ppm gasoil); NYMEX ULSD futures in the US

Typical cargo

MR tanker cargoes of 30,000 to 37,000 mt; barge parcels of 2,000 to 5,000 mt

Incoterms

FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.

Notes

Always confirm the exact specification in the contract, because ULSD can mean 10 ppm or 15 ppm.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

168 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 56 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 168 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 US ULSD (15 ppm) became mandatory for highway use in 2006.

💡 Treating diesel to ultra-low sulphur strips natural lubricity, so suppliers add lubricity additive.

خودتان را در مورد Ultra Low Sulphur Diesel (ULSD) بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What is the US ASTM D975 S15 sulphur limit?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.