Passare al contenuto

Bitumen and solids

Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Paving grade bitumen is a black, sticky binder graded by how deep a standard needle sinks into it. In the EN 12591 range the grades run from 35/50 (hardest) to 160/220 (softest), and other standards also use grades such as 60/70 and 80/100.

← Tutti i prodottiDetto anche: Penetration grade bitumen, Asphalt cement, Bitumen 60/70, Bitumen 80/100, Bitumen 40/50, Asphalt binder

  • Punto di infiammabilitàAbove about 230 C (Cleveland open cup) for most grades
  • Densità1000 to 1060 kg/m³
  • ViscositàGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
  • Zolfo1 to 6% depending on crude
  • PericoloUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di Bitumen 40/50, 60/70 and 80/100 (Paving Grades), nel suo colore tipico
Un campione di Bitumen 40/50, 60/70 and 80/100 (Paving Grades) in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Fotografia di riferimento
Come Bitumen 40/50, 60/70 and 80/100 (Paving Grades) viene stoccato e movimentato nella pratica.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.

Agitate il liquido per sentire quanto è denso

Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.

Semisolido
Il colore segue il colore tipico di Bitumen 40/50, 60/70 and 80/100 (Paving Grades).
Fluido e scorrevoleDenso e pesante

Semisolido Semisolido a temperatura normale. Si muove appena e va riscaldato per essere pompato.

Viscosità tipica dai datiGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade

Velocità di agitazione
0 px/s
Movimento del liquido
0%
Si calma dopo
-
Superficie
Fermo

La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.

Aspetto

Black, glossy at hot, brittle when cold

Dove si usa

  • Road paving
  • Airport runways
  • Roofing and waterproofing
  • Hot-mix asphalt in ports and car parks

Manipolazione e sicurezza

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Proprietà tipiche

Aspetto
Black, glossy at hot, brittle when cold
Densità a 15 °C
1000 to 1060 kg/m³
Punto di infiammabilità
Above about 230 C (Cleveland open cup) for most grades
Viscosità
Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
Punto di scorrimento
Not applicable
Zolfo tipico
1 to 6% depending on crude

◉What it is

Bitumen is the heavy residue of crude distillation. Wikipedia describes it as the heavy fraction boiling above about 500 C after vacuum distillation. Paving grades are defined by penetration at 25 C in tenths of a millimetre: 40/50 means 40 to 50 units. Hard grades such as 40/50 resist rutting in hot climates and heavy traffic, while softer grades like 80/100 resist cracking in cold climates. It is stored and moved at about 150 C.

⬡What it is made of

C40+ asphaltenes, resins, saturates and aromatics; sulphur 1 to 6%.

⚛La chimica

Bitumen is a colloidal system: asphaltene clusters dispersed in an oily maltene phase of resins, aromatics and saturates. The ratio decides stiffness. More asphaltenes make a harder bitumen.

⚙How it is made

Vacuum distillation residue from suitable crude oils (such as heavy Middle East crudes) is the base. Air blowing or blending of hard and soft components adjusts penetration.

▶How it works

Penetration (ASTM D5, EN 1426), softening point (ASTM D36, EN 1427) and viscosity are used to measure stiffness. It binds aggregate in asphalt concrete, becoming fluid at 150 C and solid at ambient temperature.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.

★Why it matters in the Gulf

The GCC consumes large volumes of bitumen in road and airport projects, and Gulf and Iranian bitumen is traded to Central Asia and East Africa. Refinery-by-refinery supply and export volumes are not stated.

Molecole chiave

Norme e specifiche

EN 12591European specification for paving grade bitumens (penetration grades).
ASTM D946US penetration-graded asphalt cement.
ASTM D3381Viscosity-graded asphalt cement.
AASHTO M 320Performance-graded asphalt binder.

Pericoli

UN3257 for hot bitumen shipped as an elevated temperature liquidClasse Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Come si commercializza

Units

Metric tonnes

Benchmarks

Contract-based; price tracks crude oil and fuel oil; no futures

Typical cargo

Bulk bitumen vessels 3,000 to 20,000 mt; ISO tanks; drums

Incoterms

FOB, CFR, CIF bulk; ISO tank FCA

Notes

Penetration grades such as 60/70 are common export trade grades. Origin and volume data are not stated.

Raffinerie che lo producono: i nostri suggerimenti

54 raffinerie censite producono questo prodotto, 17 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.

Vedere tutti i 54 sulla mappa

Terminal che lo movimentano

Lo sapeva?

💡 In American usage asphalt means bitumen, and asphalt concrete is the paving mix with stone (Wikipedia).

💡 Natural bitumen from the Dead Sea was used by the Egyptians for embalming (Wikipedia).

Si metta alla prova su Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Domanda 1 di 3 · Punteggio 0 · Serie 0

What does 60/70 mean?

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.