Bitumen and solids
Oxidised Bitumen (Blown Bitumen)
Oxidised bitumen is made by blowing air through hot bitumen. It is harder and less temperature-sensitive than paving bitumen.
← Tutti i prodottiDetto anche: Blown bitumen, Industrial bitumen, 85/25, 115/15, Roofing bitumen
- Punto di infiammabilitàTypically above 240 C (varies by grade)
- Densità1020 to 1060 kg/m³
- ViscositàSoftening point 85 to 115 C
- Zolfo1 to 4%
- PericoloUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Semisolido Semisolido a temperatura normale. Si muove appena e va riscaldato per essere pompato.
Viscosità tipica dai datiSoftening point 85 to 115 C
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Black, hard
Dove si usa
- Roofing
- Waterproofing
- Pipe coating
- Sealants
Manipolazione e sicurezza
- Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
- Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
Proprietà tipiche
- Aspetto
- Black, hard
- Densità a 15 °C
- 1020 to 1060 kg/m³
- Punto di infiammabilità
- Typically above 240 C (varies by grade)
- Viscosità
- Softening point 85 to 115 C
- Punto di scorrimento
- Not applicable
- Zolfo tipico
- 1 to 4%
◉What it is
Blown bitumen is partly oxidised with air at high temperature after distillation, making it harder (Wikipedia). Grades such as 85/25 and 115/15 are named by softening point and penetration. It is used for roofing felts, waterproofing, pipe coating, and as a sealant. It is less suitable for roads because it is brittle at low temperature.
⬡What it is made of
Asphaltene-rich bitumen.
⚛La chimica
Oxygen causes dehydrogenation and linking of molecules, raising asphaltene content and softening point.
⚙How it is made
Bitumen is heated to 230 to 280 C in a blowing tower and air is bubbled through for hours.
▶How it works
Lower penetration and higher softening point give resistance to flow at high temperature.
▣Storage, loading and inspection
Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
★Why it matters in the Gulf
Oxidised grades are used for roofing and pipe coating. Gulf production and export details are not stated.
Molecole chiave
Norme e specifiche
| EN 13304 | European framework specification for oxidised bitumens. |
|---|---|
| ASTM D312 | Asphalt used in roofing. |
| IS 702 | Indian standard for industrial bitumen. |
Pericoli
Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
Come si commercializza
Units
Metric tonnes; bags; drums
Benchmarks
Contract
Typical cargo
Drums, bags, bulk
Incoterms
FOB, CIF
Notes
Specialty.
Raffinerie che lo producono: i nostri suggerimenti
54 raffinerie censite producono questo prodotto, 17 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
- 4Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 5Karbala Refinery
Iraq · 140,000 bpdGulf locationOperating
- 6Riyadh Refinery
Saudi Arabia · 126,000 bpdGulf locationOperatingDeep conversion
Terminal che lo movimentano
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
Lo sapeva?
💡 Blown bitumen is partly oxidised with air at high temperature, which makes it harder (Wikipedia).
💡 Roofing membranes rely on it.
Si metta alla prova su Oxidised Bitumen (Blown Bitumen)
How is oxidised bitumen made?
Altro in questo gruppo
- Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
- Polymer Modified Bitumen (PMB)
- Cutback Bitumen
- Bitumen Emulsion
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.






