Bitumen and solids
Cutback Bitumen
Cutback bitumen is bitumen thinned with a petroleum solvent so it can be applied cold. The solvent evaporates and leaves the hard bitumen.
← Tutti i prodottiDetto anche: Cut-back bitumen, RC, MC, SC cutbacks, Road oil, Rapid curing cutback
- Densità920 to 1000 kg/m³
- Zolfo1 to 4%
- PericoloUN1999, Class 3 flammable liquid (tars, liquid, including road oils and cutback bitumens)


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Denso Pesante. Resiste all'agitazione e si muove solo lentamente.
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Dark brown to black liquid
Dove si usa
- Prime coat on granular base
- Tack coat
- Cold mix patching
Manipolazione e sicurezza
- Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.
- Flammable vapour; keep away from ignition.
Proprietà tipiche
- Aspetto
- Dark brown to black liquid
- Densità a 15 °C
- 920 to 1000 kg/m³
- Viscosità
- Measured by Saybolt Furol or Engler viscosity
- Punto di scorrimento
- Not applicable
- Zolfo tipico
- 1 to 4%
◉What it is
Cutback bitumen is made by dissolving bitumen in a volatile solvent such as naphtha, kerosene or diesel. The solvent type decides the curing speed: rapid curing (RC) uses naphtha, medium curing (MC) uses kerosene and slow curing (SC) uses gasoil. It is used for tack coats, prime coats and cold patching. Cutbacks emit volatile organic compounds, so many countries have shifted to emulsions.
⬡What it is made of
Bitumen 60 to 80% plus solvent 20 to 40%.
⚛La chimica
Solvent molecules lower the viscosity by breaking asphaltene clusters. After spraying, the solvent evaporates and the bitumen hardens.
⚙How it is made
Hot bitumen is blended with solvent at 100 to 140 C in tanks.
▶How it works
Applied by spray at 20 to 80 C, the solvent evaporates (cure) over minutes (RC) to days (SC).
▣Storage, loading and inspection
Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.
★Why it matters in the Gulf
Cutbacks are used in road works for prime coats, and VOC rules push use toward emulsions. Regional volumes are not stated.
Molecole chiave
Norme e specifiche
| ASTM D2028 | Rapid curing cutback |
|---|---|
| ASTM D2027 | Medium curing cutback |
| ASTM D2026 | Slow curing cutback |
| IS 217 | India cutback bitumen |
Pericoli
Flammable vapour; keep away from ignition.
Come si commercializza
Units
Metric tonnes; drums
Benchmarks
Contract
Typical cargo
Bulk or drums
Incoterms
FOB, DAP
Notes
Trade is smaller than for bitumen.
Raffinerie che lo producono: i nostri suggerimenti
54 raffinerie censite producono questo prodotto, 17 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
- 4Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 5Karbala Refinery
Iraq · 140,000 bpdGulf locationOperating
- 6Riyadh Refinery
Saudi Arabia · 126,000 bpdGulf locationOperatingDeep conversion
Terminal che lo movimentano
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
Lo sapeva?
💡 Cutback production is decreasing because solvents evaporate as VOCs.
💡 Bitumen is sometimes mixed with diesel oil or kerosene before shipping (Wikipedia).
Si metta alla prova su Cutback Bitumen
What is cutback bitumen?
Altro in questo gruppo
- Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
- Polymer Modified Bitumen (PMB)
- Bitumen Emulsion
- Oxidised Bitumen (Blown Bitumen)
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
Fonti
- Bitumen (Wikipedia)
- List of UN numbers 3201 to 3300 (Wikipedia)
- List of UN numbers 1901 to 2000 (Wikipedia)
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.






