Middle distillates
Marine Diesel DMB
DMB is an ISO 8217 distillate marine fuel that may contain traces of residual oil. It has a higher allowed viscosity and density than DMA.
← Все продуктыДругие названия: DMB, Marine diesel oil (MDO), Marine diesel
- Температура вспышкиMin 60 C
- Плотность800 to 900 kg/m³
- ВязкостьMax 11.0 mm2/s at 40 C
- Низкотемпературная текучестьWinter max 0 C; summer max 6 C (ISO 8217)
- СераMax 0.50% globally under MARPOL; 0.10% in ECAs where used
- Интервал кипения170 to 400 °C


Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0. Фотография: создана по эталонному снимку, автор: Грищук ЮН, CC BY-SA 3.0, через Wikimedia Commons.
Помешайте жидкость, чтобы почувствовать её густоту
Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.
Жидкая Лёгкая и свободно текучая. Волны бегут быстро и затухают медленно.
Типичная вязкость по даннымMax 11.0 mm2/s at 40 C
- Скорость перемешивания
- 0 px/с
- Движение жидкости
- 0%
- Успокоилась через
- -
- Поверхность
- Покой
Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.
Внешний вид
Dark to clear; may be hazy
Где применяется
- Ships with older medium-speed engines
- Auxiliary engines and boilers
- Tugs and fishing vessels
Обращение и безопасность
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Marine fuel flash point min 60 C.
Типичные свойства
- Внешний вид
- Dark to clear; may be hazy
- Плотность при 15 °C
- 800 to 900 kg/m³
- Интервал кипения
- 170 to 400 °C
- Температура вспышки
- Min 60 C
- Вязкость
- Max 11.0 mm2/s at 40 C
- Температура застывания
- Winter max 0 C; summer max 6 C (ISO 8217)
- Типичное содержание серы
- Max 0.50% globally under MARPOL; 0.10% in ECAs where used
◉What it is
DMB is the second distillate grade in the ISO 8217 marine fuel standard. It is often called marine diesel oil (MDO). Unlike DMA, it is allowed to contain a small amount of residual material because it can be contaminated by residual oil in the supply chain. It is generally cloudy and slightly darker than DMA. It is mainly used by ships with older engines that tolerate a higher viscosity limit of 11 mm2/s at 40 C and by ships that do not need to burn the cleanest grade.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛Химия
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Distilled gasoil blended with small amounts of heavier gasoil or cutter streams.
▶How it works
Burns in diesel engines, sometimes requires slight heating in cold climates. Higher viscosity and density than DMA make it cheaper.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Distillate grades are available at Fujairah, but DMB-specific availability is not stated.
Ключевые молекулы
Стандарты и спецификации
| ISO 8217 | DMB limits: viscosity 11.0 mm2/s max at 40 C, density 900 kg/m3 max, flash point 60 C min. |
|---|---|
| MARPOL Annex VI | Sulphur limits (0.50% global, 0.10% in ECAs). |
Опасности
Marine fuel flash point min 60 C.
Как им торгуют
Units
Metric tonnes
Benchmarks
Platts MGO-based assessments with a small discount to DMA
Typical cargo
Barge or tanker deliveries
Incoterms
As MGO
Notes
DMB trades less than DMA because the DMA grade has become the standard.
НПЗ, которые его производят: наши рекомендации
НПЗ в списке, производящих этот продукт: 152, из них в странах Персидского залива, Иране и Ираке: 42. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionДоступ к экспорту
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingДоступ к экспорту
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingДоступ к экспорту
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
Терминалы, которые с ним работают
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Знаете ли вы
💡 DMB is sometimes simply called MDO.
💡 DMB is allowed a higher viscosity (11.0 mm2/s) than DMA (6.0 mm2/s).
Проверьте себя: Marine Diesel DMB
What is the max viscosity of DMB at 40 C?
Ещё в этой группе
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Источники
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Fujairah (Wikipedia)
Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.







