Перейти к содержимому

Middle distillates

Marine Gasoil MGO (DMA)

MGO is a clear distillate marine fuel specified as DMA in ISO 8217. It is used in smaller engines, auxiliary engines and ships operating in emission control areas.

← Все продуктыДругие названия: MGO, DMA, Marine gas oil, Marine diesel oil (loosely)

  • Температура вспышкиMin 60 C (ISO 8217)
  • Плотность800 to 890 kg/m³
  • Вязкость2.0 to 6.0 mm2/s at 40 C
  • Низкотемпературная текучестьWinter max 0 C; summer max 6 C (ISO 8217)
  • СераMax 1.0% historically; typically below 0.10% for LSMGO
  • Интервал кипения170 to 380 °C
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: Marine Gasoil MGO (DMA)
Образец Marine Gasoil MGO (DMA) в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Эталонная фотография
Как Marine Gasoil MGO (DMA) хранят и перевозят на практике.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0. Фотография: создана по эталонному снимку, автор: Грищук ЮН, CC BY-SA 3.0, через Wikimedia Commons.

Помешайте жидкость, чтобы почувствовать её густоту

Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.

Жидкая
Цвет соответствует типичному цвету Marine Gasoil MGO (DMA).
Жидкая и подвижнаяГустая и тяжёлая

Жидкая Лёгкая и свободно текучая. Волны бегут быстро и затухают медленно.

Типичная вязкость по данным2.0 to 6.0 mm2/s at 40 C

Скорость перемешивания
0 px/с
Движение жидкости
0%
Успокоилась через
-
Поверхность
Покой

Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.

Внешний вид

Clear and bright, pale yellow

Где применяется

  • Auxiliary engines on all ships
  • Main engines of small vessels
  • Boilers and incinerators
  • ECA compliance fuel

Обращение и безопасность

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

Типичные свойства

Внешний вид
Clear and bright, pale yellow
Плотность при 15 °C
800 to 890 kg/m³
Интервал кипения
170 to 380 °C
Температура вспышки
Min 60 C (ISO 8217)
Вязкость
2.0 to 6.0 mm2/s at 40 C
Температура застывания
Winter max 0 C; summer max 6 C (ISO 8217)
Типичное содержание серы
Max 1.0% historically; typically below 0.10% for LSMGO

◉What it is

Marine gasoil is a distillate fuel supplied to ships under the ISO 8217 grade DMA. It has no residual oil, so it is cleaner and easier to handle than heavy fuel and does not need heating in most climates. Ships use it in auxiliary engines, in smaller main engines, for boiler lighting and when entering emission control areas. The standard limits sulphur through MARPOL, which is 0.50 percent in global waters and 0.10 percent in ECAs. DMA has a maximum viscosity of 6 mm2/s at 40 C and maximum density of 890 kg/m3 at 15 C.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛Химия

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled from crude in the CDU and hydrotreated; may be blended with cracked gasoil and kerosene components.

▶How it works

Burns in diesel engines without heating. Low viscosity requires cooling the fuel at the injectors to keep the viscosity above minimum for lubrication.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Fujairah is one of the world's largest bunkering hubs and supplies MGO to ships passing the Strait of Hormuz. No emission control area covers the Gulf (the ECAs are the Baltic Sea, North Sea, North America, the US Caribbean and the Mediterranean), but ships may buy MGO for ECA calls elsewhere. Current volumes are not stated.

Ключевые молекулы

Стандарты и спецификации

ISO 8217Marine fuels standard; DMA grade: viscosity 2.0 to 6.0 mm2/s at 40 C, density 890 kg/m3 max, flash point 60 C min.
MARPOL Annex VI0.50% global and 0.10% ECA sulphur limits (IMO).
ISO 4259Precision of test methods and use of precision data.

Опасности

UN1202 (diesel fuel or gas oil)Класс Class 3 flammable liquid, packing group III (when shipped as dangerous goods)

SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

Как им торгуют

Units

Metric tonnes

Benchmarks

Platts MGO assessments at Fujairah, Singapore, Rotterdam and other ports; ICE Gasoil futures as reference

Typical cargo

Barge deliveries of 100 to 2,000 mt; bulk cargoes by MR tanker

Incoterms

FOB barge at the port or delivered ex-wharf; ships purchase on a DAP basis at anchorage.

Notes

Sold per mt with a BDN (bunker delivery note) and MARPOL sample.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 152, из них в странах Персидского залива, Иране и Ираке: 42. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (152) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 MGO is the cleanest standard marine fuel and a distillate similar to No. 2 diesel.

💡 DMA is limited to 6.0 mm2/s at 40 C, while the residual grade RMG 380 is limited to 380 mm2/s at 50 C.

Проверьте себя: Marine Gasoil MGO (DMA)

Вопрос 1 из 3 · Счёт 0 · Серия 0

What is the max viscosity of DMA at 40 C?

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.