Перейти к содержимому

Middle distillates

Jet A-1

Jet A-1 is the standard kerosene-type fuel for civil aircraft turbines worldwide outside the United States. It has a freezing point of minus 47 C and a flash point of at least 38 C.

← Все продуктыДругие названия: Jet fuel, Aviation turbine fuel, ATF, Kerosene (jet)

  • Температура вспышки38 °C
  • Плотность775 to 840 kg/m³
  • ВязкостьMax 8.0 mm2/s at minus 20 C (typical limit in the specification)
  • Низкотемпературная текучестьFreezing point max minus 47 C
  • СераUp to 0.30 % m/m (specification limit); typically much lower
  • Интервал кипения145 to 300 °C
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: Jet A-1
Образец Jet A-1 в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Эталонная фотография
Как Jet A-1 хранят и перевозят на практике.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.

Помешайте жидкость, чтобы почувствовать её густоту

Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.

Жидкая
Цвет соответствует типичному цвету Jet A-1.
Жидкая и подвижнаяГустая и тяжёлая

Жидкая Лёгкая и свободно текучая. Волны бегут быстро и затухают медленно.

Типичная вязкость по даннымMax 8.0 mm2/s at minus 20 C (typical limit in the specification)

Скорость перемешивания
0 px/с
Движение жидкости
0%
Успокоилась через
-
Поверхность
Покой

Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.

Внешний вид

Clear and bright, colourless to pale straw. Free of visible water, dirt and haze. Colour is measured on the Saybolt scale: +30 is water-white, and a fuel that has turned yellow or dark has usually been contaminated or has aged.

Где применяется

  • Commercial aviation turbine fuel
  • Blending with sustainable aviation fuel (SAF)

Обращение и безопасность

  • Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).
  • Flammable; static buildup in handling; antistatic additive used.

Типичные свойства

Внешний вид
Clear, colourless to straw
Плотность при 15 °C
775 to 840 kg/m³
Интервал кипения
145 to 300 °C
Температура вспышки
38 °C
Вязкость
Max 8.0 mm2/s at minus 20 C (typical limit in the specification)
Температура застывания
Freezing point max minus 47 C
Типичное содержание серы
Up to 0.30 % m/m (specification limit); typically much lower

◉What it is

Jet A-1 is a carefully controlled kerosene cut with a carbon range of about 8 to 16. It must meet tight limits for freezing point, flash point, thermal stability and cleanliness because it flows through aircraft fuel systems at altitude. It is made by distilling and treating crude oil, and may include approved additives such as antistatic additive, corrosion inhibitor and icing inhibitor. Jet A-1 contrasts with the US Jet A, which has a slightly higher freezing point of minus 40 C. Sustainable aviation fuel can be blended in up to approved limits.

⬡What it is made of

C8 to C16 paraffins, naphthenes and aromatics.

⚛Химия

Kerosene molecules are medium-length alkanes and cycloalkanes with some aromatics. Straight chains of this length would freeze at low temperature, so the freezing point is controlled by composition. Aromatics help seals swell but form soot, so they are limited. Sulphur is limited to 0.30 percent mass by specification.

⚙How it is made

Straight-run kerosene from the crude distillation unit, treated by hydrotreating or Merox sweetening, with additives. Hydrocracker kerosene is also used.

▶How it works

A low freezing point keeps fuel flowing at altitude, the flash point ensures safe ground handling, and thermal stability prevents deposits in hot engine sections. Energy per kilogram is high at roughly 43 MJ/kg.

▣Storage, loading and inspection

Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).

★Why it matters in the Gulf

The Gulf is a major jet fuel hub, with supply from regional refineries and storage at Fujairah. Wikipedia reports about 10 million cubic metres of refined-product storage in the Fujairah oil industry zone. Verified jet fuel volumes were not retrieved.

Ключевые молекулы

Стандарты и спецификации

DEF STAN 91-091UK Ministry of Defence specification for Jet A-1.
ASTM D1655Standard specification for aviation turbine fuels (Jet A and Jet A-1).
IATA Guidance Material (Kerosene Type)Industry guidance for aviation fuel quality.

Опасности

UN1863 (fuel, aviation, turbine engine)Класс Class 3 flammable liquid, packing group III

Flammable; static buildup in handling; antistatic additive used.

Как им торгуют

Units

Barrels or metric tonnes

Benchmarks

Platts Jet Kero FOB Arab Gulf, Singapore, NWE

Typical cargo

LR1 or MR tankers 35,000 to 75,000 tonnes

Incoterms

FOB, CFR, DAP at airport

Notes

Release certificate and fuel quality must match DEF STAN 91-091 or ASTM D1655.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 76, из них в странах Персидского залива, Иране и Ираке: 26. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (76) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 Jet A-1 has a freezing point of minus 47 C, while US Jet A is minus 40 C.

💡 Jet A-1 requires an antistatic additive; Jet A does not (Wikipedia).

Проверьте себя: Jet A-1

Вопрос 1 из 3 · Счёт 0 · Серия 0

Jet A-1 maximum freezing point is:

Открыть страницу спецификации PST

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.