Middle distillates
Heating Oil
Heating oil is a light distillate similar to diesel that is burned in boilers and furnaces. It is often dyed or marked for tax reasons.
← Все продуктыДругие названия: Home heating oil, Fuel oil No. 2, Gasoil for heating, Domestic heating oil
- Температура вспышкиAbove 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
- Плотность820 to 870 kg/m³
- Вязкость1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Низкотемпературная текучестьTypically below -6 C for grade 2
- СераVaries from 10 ppm to 0.1% depending on market
- Интервал кипения170 to 390 °C


Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0. Фотография: создана по эталонному снимку, автор: DanTD, CC BY-SA 3.0, через Wikimedia Commons.
Помешайте жидкость, чтобы почувствовать её густоту
Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.
Жидкая Лёгкая и свободно текучая. Волны бегут быстро и затухают медленно.
Типичная вязкость по данным1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Скорость перемешивания
- 0 px/с
- Движение жидкости
- 0%
- Успокоилась через
- -
- Поверхность
- Покой
Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.
Внешний вид
Pale yellow to red or blue when dyed
Где применяется
- Home and building heating
- Industrial boilers and dryers
- Backup generators
- Blending stock for diesel in some markets
Обращение и безопасность
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Типичные свойства
- Внешний вид
- Pale yellow to red or blue when dyed
- Плотность при 15 °C
- 820 to 870 kg/m³
- Интервал кипения
- 170 to 390 °C
- Температура вспышки
- Above 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
- Вязкость
- 1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Температура застывания
- Typically below -6 C for grade 2
- Типичное содержание серы
- Varies from 10 ppm to 0.1% depending on market
◉What it is
Heating oil is a low-viscosity fuel used for space heating in homes and commercial buildings. In North America it is called No. 2 fuel oil and is chemically almost identical to diesel, but it is taxed less and marked with dye or chemical tracers. In Europe it is often a gasoil with higher allowed sulphur or a lower cost specification. Heating oil burns in pressure-jet burners after atomisation. Because it is stored in outdoor or basement tanks, cold-flow quality and stability during long storage matter.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛Химия
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Taken from the middle distillate cut of the CDU and treated in hydrotreaters to the required sulphur level. Cheaper marker dyes and tracers are added where tax rules require.
▶How it works
Atomised oil mixes with air and burns, releasing about 38 MJ per litre. Sulphur determines the amount of SO2 in flue gas. Wax crystals can block filters in cold weather, so winter grades are blended with kerosene or additives.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Heating demand in the GCC is minimal. Heating oil specifications appear mainly in export trades and in storage at Fujairah. Central Asia, a priority region for PST, uses heating oil and similar grades seasonally.
Ключевые молекулы
Стандарты и спецификации
| ASTM D396 | US standard for fuel oils, including No. 1 and No. 2 grades. |
|---|---|
| BS 2869 Class C2 | UK domestic heating oil (kerosene type). |
| National heating gasoil standards | European heating gasoil rules vary by country, for example DIN 51603-1 in Germany. |
Опасности
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Как им торгуют
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage. In US trading, gallons and ULSD heating oil (NYMEX contract).
Benchmarks
NY Harbor heating oil and ULSD futures historically; Platts gasoil assessments in Europe and the Gulf
Typical cargo
Barge or tanker parcels from 2,000 to 30,000 mt
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Often traded together with diesel and taxed differently by country.
НПЗ, которые его производят: наши рекомендации
НПЗ в списке, производящих этот продукт: 152, из них в странах Персидского залива, Иране и Ираке: 42. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionДоступ к экспорту
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingДоступ к экспорту
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingДоступ к экспорту
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
Терминалы, которые с ним работают
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Знаете ли вы
💡 Heating oil is dyed in many countries so authorities can detect illegal use in road vehicles.
💡 No. 2 heating oil is chemically very similar to diesel but is taxed less.
Проверьте себя: Heating Oil
In the US, heating oil is usually called which grade?
Ещё в этой группе
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Источники
Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.






