Heavy fuels
Cutter Stock
Cutter stock is a lighter oil blended into heavy residue to reduce its viscosity. Typical cutters are gasoil, kerosene or light cycle oil.
← 全部产品又称: Cutter, Cutterstock, Cutting oil (fuel oil), Viscosity cutter
- 密度800 to 950 kg/m³
- 黏度1 to 30 mm2/s at 40 C
- 沸程170 to 400 °C
- 危险性Depends on the cutter (for example UN1202 for gasoil), Depends on the cutter; Class 3 if gasoil or kerosene

图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.
搅动液体,感受它有多稠
用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。
中等 油性。波纹较慢、较圆。
数据中的典型粘度1 to 30 mm2/s at 40 C
- 搅动速度
- 0 像素/秒
- 液体运动
- 0%
- 静止所需时间
- -
- 表面
- 静止
该等级仅供手感参考。所示粘度数值以规格数据为准。
外观
Clear to dark
应用领域
- Fuel oil blending
- Bitumen cutback
装卸与安全
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Flammable if gasoil or kerosene.
典型性质
- 外观
- Clear to dark
- 15 °C 密度
- 800 to 950 kg/m³
- 沸程
- 170 to 400 °C
- 黏度
- 1 to 30 mm2/s at 40 C
- 倾点
- Varies
- 典型含硫量
- Varies
◉What it is
Cutter stock is any lighter petroleum stream used to dilute a heavy oil so it flows and meets a viscosity target. In fuel oil blending, it brings vacuum residue down to 180 or 380 mm2/s. Common cutters are gasoil, light cycle oil, kerosene, visbreaker gasoil and diesel. The cost, sulphur and density of the cutter directly affect the blend. Fuel oil blending is a major business at storage hubs.
⬡What it is made of
C10 to C25 distillate or cracked stock.
⚛化学成分
Light aromatic and paraffinic hydrocarbons act as solvent for asphaltenes. Too much paraffinic cutter can destabilise asphaltenes.
⚙How it is made
Taken from distillation or cracking units.
▶How it works
Blending uses a viscosity blending index to calculate how much cutter is needed.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Blenders in Fujairah use distillate cutter, typically gasoil or light cycle oil, to make bunker fuel. Specific blending volumes are not stated.
主要分子
标准与规格
| ISO 8217 | The finished blend must meet the marine fuel specification. |
|---|---|
| ASTM D341 | Viscosity-temperature charts for liquid petroleum products. |
危害
Flammable if gasoil or kerosene.
交易方式
Units
Metric tonnes
Benchmarks
Priced from gasoil or LCO
Typical cargo
Barge or tanker
Incoterms
FOB
Notes
Cost tied to gasoil.
可生产此产品的炼厂:我们的推荐
已收录 91 家炼厂生产此产品,其中 21 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversion导出权限
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperating导出权限
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversion导出权限
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperating导出权限
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperating导出权限
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversion导出权限
可处理该产品的码头
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
你知道吗
💡 Cutter stock cost can account for a large part of bunker blend price.
💡 Incompatible cutters can create sludge.
测验您对 Cutter Stock 的掌握
What does cutter do?
该组更多内容
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Furnace Oil
来源
由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。






