跳至正文
登录申请报价

Heavy fuels

IFO 380 and IFO 180

IFO 380 and IFO 180 are intermediate fuel oils named for their maximum viscosity in mm2/s at 50 C. They are blends of residual oil with some distillate.

← 全部产品又称: Intermediate Fuel Oil 380, Intermediate Fuel Oil 180, RMG 380, RME 180, IFO

  • 闪点Min 60 C
  • 密度960 to 991 kg/m³
  • 黏度Max 180 or 380 mm2/s at 50 C
  • 冷流性Max 30 C
  • 硫Depends on type: HS up to 3.5%; VLS up to 0.50%
  • 危险性Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
典型颜色,实验室玻璃
IFO 380 and IFO 180 的实验室玻璃样品,呈典型颜色
IFO 380 and IFO 180 的实验室玻璃样品,深色影棚背景,便于判断颜色。
参考照片
IFO 380 and IFO 180 在实际中如何储存和运输。

图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.

搅动液体,感受它有多稠

用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。

很稠
颜色与 IFO 380 and IFO 180 的典型颜色一致。
稀而松散稠而重

很稠 很重。几乎不动,回流也很慢。

数据中的典型粘度Max 180 or 380 mm2/s at 50 C

搅动速度
0 像素/秒
液体运动
0%
静止所需时间
-
表面
静止

该等级仅供手感参考。所示粘度数值以规格数据为准。

外观

Black, viscous

应用领域

  • Ships with slow and medium speed diesel engines
  • Power stations

装卸与安全

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

典型性质

外观
Black, viscous
15 °C 密度
960 to 991 kg/m³
闪点
Min 60 C
黏度
Max 180 or 380 mm2/s at 50 C
倾点
Max 30 C
典型含硫量
Depends on type: HS up to 3.5%; VLS up to 0.50%

◉What it is

Intermediate fuel oil is a marine residual fuel blend. The numbers refer to viscosity in centistokes at 50 C: 380 or 180. According to Wikipedia, IFO 380 is about 98 percent residual oil with 2 percent distillate, while IFO 180 is about 88 percent residual and 12 percent distillate. In ISO 8217 terms IFO 380 corresponds to RMG 380 and IFO 180 to RME 180. They were the main ship fuels before IMO 2020 and are still sold in high and low sulphur forms.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛化学成分

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

Vacuum residue or visbreaker residue is diluted with cutter stock or light cycle oil to reach 180 or 380 viscosity.

▶How it works

The fuel is heated to about 130 C or more for injection. The 380 grade is usually cheaper per tonne than 180 because it needs less of the more expensive distillate cutter to reach its viscosity.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

IFO 380 in high-sulphur and 0.50 percent forms is sold at Fujairah. Gulf refineries produce the residual component. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

主要分子

标准与规格

ISO 8217RME 180 and RMG 380 grades: density 991 kg/m3 max, viscosity 180 or 380 mm2/s max at 50 C, flash point 60 C min.
MARPOL Annex VISulphur limits.

危害

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.船型级别 Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

交易方式

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts 380 CST HSFO and 180 CST assessments

Typical cargo

Bunker barge or tanker

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

380 is the global benchmark viscosity.

可生产此产品的炼厂:我们的推荐

已收录 91 家炼厂生产此产品,其中 21 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。

在地图上查看全部 91 个

可处理该产品的码头

你知道吗

💡 The numbers are viscosity in mm2/s at 50 C, not density.

💡 The 50 C test temperature is used because heavy fuel is too thick to measure conveniently at 40 C.

测验您对 IFO 380 and IFO 180 的掌握

第 1 题,共 3 题 · 得分 0 · 连对 0

What does 380 mean in IFO 380?

该组更多内容

来源

由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。