Heavy fuels
HSFO 3.5% (High Sulphur Fuel Oil)
HSFO is residual marine fuel with up to 3.5 percent sulphur. After IMO 2020 it can be burned only by ships fitted with exhaust gas scrubbers.
← 全部产品又称: HSFO, High sulphur fuel oil, 3.5% sulphur fuel oil, RMG 380 3.5%
- 闪点Min 60 C
- 密度960 to 991 kg/m³
- 黏度Up to 380 mm2/s at 50 C (RMG 380)
- 冷流性Max 30 C (ISO 8217 RMG)
- 硫Up to 3.50% m/m (typically 2.5 to 3.5%)
- 危险性Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.
HSFO 3.5% (High Sulphur Fuel Oil) 在常温下为固体,因此没有可搅动的液体。 Up to 380 mm2/s at 50 C (RMG 380)
外观
Black, opaque and very viscous. It must be heated to flow. As with all residual fuels, colour says nothing about quality.
应用领域
- Ships with scrubbers
- Power plants and some industry
装卸与安全
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
典型性质
- 外观
- Black, opaque, viscous
- 15 °C 密度
- 960 to 991 kg/m³
- 闪点
- Min 60 C
- 黏度
- Up to 380 mm2/s at 50 C (RMG 380)
- 倾点
- Max 30 C (ISO 8217 RMG)
- 典型含硫量
- Up to 3.50% m/m (typically 2.5 to 3.5%)
◉What it is
HSFO was the main ship fuel before 2020, when the global limit for sulphur in marine fuel was 3.50 percent. The IMO cut the global cap to 0.50 percent from 1 January 2020, and carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO). Today HSFO is sold to scrubber-fitted vessels and to some land users such as power plants. It is a thick residual oil of RMG 380 grade or similar, and is cheaper than low sulphur fuel. Its market share fell sharply after 2020 but recovered in some ports as scrubber numbers grew.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛化学成分
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
The bottom product of vacuum distillation or visbreaking is blended with cutter stock (distillate) to reach the target viscosity. No desulphurisation of the residue is done in most cases.
▶How it works
Residual fuel must be heated to about 130 to 150 C to be injected into a marine diesel engine, with viscosity around 10 to 15 mm2/s at the injectors. Sulphur oxides in exhaust are removed by a scrubber that sprays water or caustic.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Fujairah sells HSFO to ships fitted with scrubbers, and Gulf refineries produce high-sulphur residue that can be sold as HSFO. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.
主要分子
标准与规格
| ISO 8217 | Residual grades such as RMG 380: viscosity 380 mm2/s max at 50 C, flash point 60 C min. |
|---|---|
| MARPOL Annex VI Reg. 14 | 3.50% global limit until 2019 and 0.50% from 1 January 2020 (IMO); fuel above 0.50% may be burned only with an approved exhaust gas cleaning system. |
| IMO exhaust gas cleaning system guidelines (MEPC.259(68)) | Guidelines for scrubbers on ships. |
危害
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
交易方式
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts HSFO 380 assessments at Fujairah, Singapore, Rotterdam
Typical cargo
Barge deliveries; tanker loads up to 80,000 mt
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
HSFO usually trades at a discount to VLSFO; the spread drives scrubber economics.
可生产此产品的炼厂:我们的推荐
已收录 121 家炼厂生产此产品,其中 40 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversion导出权限
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperating导出权限
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversion导出权限
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversion导出权限
- 5SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperating导出权限
- 6YASREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingDeep conversion导出权限
可处理该产品的码头
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
你知道吗
💡 Before 2020 the global limit was 3.50 percent sulphur.
💡 Carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO).
测验您对 HSFO 3.5% (High Sulphur Fuel Oil) 的掌握
What was the pre-2020 global marine sulphur limit?
该组更多内容
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
来源
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Port of Fujairah (Wikipedia)
- Fujairah (Wikipedia)
由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。






