Heavy fuels
ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
ULSFO is a residual or blended fuel with sulphur at or below 0.10 percent. It is used in emission control areas in place of distillate fuel.
← 全部产品又称: ULSFO, 0.1% sulphur fuel oil, ECA fuel oil
- 闪点Min 60 C
- 密度860 to 950 kg/m³
- 黏度10 to 180 mm2/s at 50 C typical
- 硫Max 0.10% m/m
- 危险性Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.
ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) 在常温下为固体,因此没有可搅动的液体。 10 to 180 mm2/s at 50 C typical
外观
Dark to black
应用领域
- ECA fuel for ships without scrubbers
- Alternative to LSMGO
装卸与安全
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
典型性质
- 外观
- Dark to black
- 15 °C 密度
- 860 to 950 kg/m³
- 闪点
- Min 60 C
- 黏度
- 10 to 180 mm2/s at 50 C typical
- 倾点
- Varies by blend
- 典型含硫量
- Max 0.10% m/m
◉What it is
ULSFO is a marine fuel designed to meet the 0.10 percent sulphur cap in ECAs without being a pure distillate. It is made from low sulphur components and is usually cheaper than LSMGO. Because the limit is so low, producing it from residue is challenging. It is not a formal ISO 8217 grade: it usually sits in the DMB or RMD/RME families with 0.10% sulphur. Supply is limited, and many ships simply use LSMGO.
⬡What it is made of
C15 to C50 mixture, mostly paraffinic and hydrotreated.
⚛化学成分
ULSFO is made by blending highly hydrotreated components, so it contains fewer aromatic and sulphur-bearing molecules than other residual fuels. The low sulphur level is the result of hydrodesulphurisation, which converts sulphur in organic molecules to H2S that is removed.
⚙How it is made
Hydrotreated residue, hydrocracker bottoms and distillate are blended; supply depends on the refinery.
▶How it works
Heated as a residual fuel. Low sulphur reduces acid corrosion but also cylinder oil cold corrosion if the engine uses high BN oil.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf demand is limited because there is no Gulf ECA, but ships heading to ECAs can buy low-sulphur fuels at Fujairah. ULSFO availability there is not stated.
主要分子
标准与规格
| MARPOL Annex VI Reg. 14 | 0.10% sulphur limit in ECAs from 1 January 2015 (IMO). |
|---|---|
| ISO 8217 | The applicable grade depends on viscosity; ULSFO is not a separate ISO grade. |
危害
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
交易方式
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts ULSFO assessments (Singapore, Rotterdam, Fujairah)
Typical cargo
Barge deliveries
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Not widely traded; priced between LSMGO and VLSFO.
可生产此产品的炼厂:我们的推荐
已收录 121 家炼厂生产此产品,其中 40 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversion导出权限
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperating导出权限
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversion导出权限
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversion导出权限
- 5SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperating导出权限
- 6YASREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingDeep conversion导出权限
可处理该产品的码头
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
你知道吗
💡 ULSFO volumes are small compared with VLSFO.
💡 The 0.10 percent ECA limit has applied since 1 January 2015 (IMO).
测验您对 ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) 的掌握
What sulphur does ULSFO have?
该组更多内容
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
来源
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Port of Fujairah (Wikipedia)
- Fujairah (Wikipedia)
由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。






