Skip to content

Bitumen and solids

Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Paving grade bitumen is a black, sticky binder graded by how deep a standard needle sinks into it. In the EN 12591 range the grades run from 35/50 (hardest) to 160/220 (softest), and other standards also use grades such as 60/70 and 80/100.

← All productsAlso called: Penetration grade bitumen, Asphalt cement, Bitumen 60/70, Bitumen 80/100, Bitumen 40/50, Asphalt binder

  • Flash pointAbove about 230 C (Cleveland open cup) for most grades
  • Density1000 to 1060 kg/m³
  • ViscosityGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
  • Sulphur1 to 6% depending on crude
  • HazardUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
Typical colour, laboratory glass
Laboratory glass sample of Bitumen 40/50, 60/70 and 80/100 (Paving Grades), in its typical colour
A sample of Bitumen 40/50, 60/70 and 80/100 (Paving Grades) in laboratory glass on a dark studio background, so the colour is easy to judge.
Reference photograph
How Bitumen 40/50, 60/70 and 80/100 (Paving Grades) is stored and moved in practice.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.

Stir the liquid to feel how thick it is

Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.

Semi-solid
Colour follows the typical colour of Bitumen 40/50, 60/70 and 80/100 (Paving Grades).
Thin and looseThick and heavy

Semi-solid Semi-solid at normal temperature. It only creeps and has to be heated to pump.

Typical viscosity from the dataGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade

Stir speed
0 px/s
Liquid movement
0%
Settled after
-
Surface
Still

The class is a guide for feel. The viscosity figure shown is the one in the specification data.

How it looks

Black, glossy at hot, brittle when cold

Where it is used

  • Road paving
  • Airport runways
  • Roofing and waterproofing
  • Hot-mix asphalt in ports and car parks

Handling and safety

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Typical properties

Appearance
Black, glossy at hot, brittle when cold
Density at 15 °C
1000 to 1060 kg/m³
Flash point
Above about 230 C (Cleveland open cup) for most grades
Viscosity
Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
Pour point
Not applicable
Typical sulphur
1 to 6% depending on crude

◉What it is

Bitumen is the heavy residue of crude distillation. Wikipedia describes it as the heavy fraction boiling above about 500 C after vacuum distillation. Paving grades are defined by penetration at 25 C in tenths of a millimetre: 40/50 means 40 to 50 units. Hard grades such as 40/50 resist rutting in hot climates and heavy traffic, while softer grades like 80/100 resist cracking in cold climates. It is stored and moved at about 150 C.

⬡What it is made of

C40+ asphaltenes, resins, saturates and aromatics; sulphur 1 to 6%.

⚛The chemistry

Bitumen is a colloidal system: asphaltene clusters dispersed in an oily maltene phase of resins, aromatics and saturates. The ratio decides stiffness. More asphaltenes make a harder bitumen.

⚙How it is made

Vacuum distillation residue from suitable crude oils (such as heavy Middle East crudes) is the base. Air blowing or blending of hard and soft components adjusts penetration.

▶How it works

Penetration (ASTM D5, EN 1426), softening point (ASTM D36, EN 1427) and viscosity are used to measure stiffness. It binds aggregate in asphalt concrete, becoming fluid at 150 C and solid at ambient temperature.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.

★Why it matters in the Gulf

The GCC consumes large volumes of bitumen in road and airport projects, and Gulf and Iranian bitumen is traded to Central Asia and East Africa. Refinery-by-refinery supply and export volumes are not stated.

Key molecules

Standards and specifications

EN 12591European specification for paving grade bitumens (penetration grades).
ASTM D946US penetration-graded asphalt cement.
ASTM D3381Viscosity-graded asphalt cement.
AASHTO M 320Performance-graded asphalt binder.

Hazards

UN3257 for hot bitumen shipped as an elevated temperature liquidClass Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

How it is traded

Units

Metric tonnes

Benchmarks

Contract-based; price tracks crude oil and fuel oil; no futures

Typical cargo

Bulk bitumen vessels 3,000 to 20,000 mt; ISO tanks; drums

Incoterms

FOB, CFR, CIF bulk; ISO tank FCA

Notes

Penetration grades such as 60/70 are common export trade grades. Origin and volume data are not stated.

Refineries that make it: our suggestions

54 listed refineries make this product, 17 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.

See all 54 on the map

Terminals that handle it

Did you know

💡 In American usage asphalt means bitumen, and asphalt concrete is the paving mix with stone (Wikipedia).

💡 Natural bitumen from the Dead Sea was used by the Egyptians for embalming (Wikipedia).

Test yourself on Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Question 1 of 3 · Score 0 · Streak 0

What does 60/70 mean?

More in this group

Sources

Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.