Bitumen and solids
Polymer Modified Bitumen (PMB)
PMB is bitumen blended with polymers such as SBS to improve elasticity and temperature performance. It is used on heavy traffic roads and in roofing membranes.
← All productsAlso called: PMB, SBS modified bitumen, PG 76-22, Modified binder
- Flash pointTypically above 220 C (varies by grade)
- Density1000 to 1040 kg/m³
- ViscositySoftening point at least 65 C for the PMB 45/80-65 grade
- Sulphur1 to 6%
- HazardUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.
Polymer Modified Bitumen (PMB) is a solid at normal temperature, so there is no liquid to stir. Softening point at least 65 C for the PMB 45/80-65 grade
How it looks
Black
Where it is used
- Heavy traffic roads
- Airports
- Bridge decks
- Roofing membranes
Handling and safety
- Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.
- Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
Typical properties
- Appearance
- Black
- Density at 15 °C
- 1000 to 1040 kg/m³
- Flash point
- Typically above 220 C (varies by grade)
- Viscosity
- Softening point at least 65 C for the PMB 45/80-65 grade
- Pour point
- Not applicable
- Typical sulphur
- 1 to 6%
◉What it is
Polymer modified bitumen is conventional bitumen that has been blended with polymers. The most common is SBS (styrene-butadiene-styrene), which adds elasticity and resistance to rutting and cracking. Others are plastomers such as EVA and recycled rubber (Wikipedia mentions tyre rubber). PMB is graded by softening point, elastic recovery and penetration. It costs more than plain bitumen but extends pavement life.
⬡What it is made of
Bitumen plus 2 to 7% polymer; sometimes cross-linking agent such as sulphur.
⚛The chemistry
SBS has hard polystyrene end blocks and soft polybutadiene mid blocks. In bitumen the blocks form a network that gives rubber-like elasticity.
⚙How it is made
Base bitumen is mixed with polymer in high shear mills at 170 to 190 C, then held for swelling.
▶How it works
The polymer network lets the binder stretch and recover, so pavement resists rutting in summer and cracking in winter.
▣Storage, loading and inspection
Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.
★Why it matters in the Gulf
PMB is relevant for Gulf highways and airports where summer pavement temperatures are very high. Regional plant details are not stated.
Key molecules
Standards and specifications
| EN 14023 | European framework specification for polymer modified bitumens. |
|---|---|
| AASHTO M 320 and M 332 | Performance-graded binder specifications, M 332 using the multiple stress creep recovery test. |
| ASTM D6373 | Performance-graded asphalt binder. |
Hazards
Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.
How it is traded
Units
Metric tonnes
Benchmarks
Contract price; premium over 60/70
Typical cargo
Tank truck, ISO tank, drums
Incoterms
DAP, FCA, FOB
Notes
Priced at a premium over plain bitumen; the premium varies by market.
Refineries that make it: our suggestions
73 listed refineries make this product, 22 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 3SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionExport access
- 4Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 5Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperatingExport access
- 6Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
Terminals that handle it
- SATORP refinery, Jubail
Saudi Arabia
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
Did you know
💡 SBS is the polymer most often used to modify bitumen.
💡 Polymer modification raises elasticity and resistance to rutting.
Test yourself on Polymer Modified Bitumen (PMB)
Common polymer in PMB?
More in this group
- Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
- Cutback Bitumen
- Bitumen Emulsion
- Oxidised Bitumen (Blown Bitumen)
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.





