Heavy fuels
HSFO 3.5% (High Sulphur Fuel Oil)
HSFO is residual marine fuel with up to 3.5 percent sulphur. After IMO 2020 it can be burned only by ships fitted with exhaust gas scrubbers.
← همهٔ محصولاتنامهای دیگر: HSFO, High sulphur fuel oil, 3.5% sulphur fuel oil, RMG 380 3.5%
- نقطهٔ اشتعالMin 60 C
- چگالی960 to 991 kg/m³
- گرانرویUp to 380 mm2/s at 50 C (RMG 380)
- جریان در سرماMax 30 C (ISO 8217 RMG)
- گوگردUp to 3.50% m/m (typically 2.5 to 3.5%)
- خطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


منبع تصاویر نمونههای شیشهای آزمایشگاهی از روی عکسهای مرجع در ویکیمدیا کامنز ساخته شدهاند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.
HSFO 3.5% (High Sulphur Fuel Oil) در دمای عادی جامد است، بنابراین مایعی برای همزدن وجود ندارد. Up to 380 mm2/s at 50 C (RMG 380)
ظاهر محصول
Black, opaque and very viscous. It must be heated to flow. As with all residual fuels, colour says nothing about quality.
کاربردها
- Ships with scrubbers
- Power plants and some industry
جابهجایی و ایمنی
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
ویژگیهای معمول
- ظاهر
- Black, opaque, viscous
- چگالی در 15 °C
- 960 to 991 kg/m³
- نقطهٔ اشتعال
- Min 60 C
- گرانروی
- Up to 380 mm2/s at 50 C (RMG 380)
- نقطهٔ ریزش
- Max 30 C (ISO 8217 RMG)
- گوگرد معمول
- Up to 3.50% m/m (typically 2.5 to 3.5%)
◉What it is
HSFO was the main ship fuel before 2020, when the global limit for sulphur in marine fuel was 3.50 percent. The IMO cut the global cap to 0.50 percent from 1 January 2020, and carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO). Today HSFO is sold to scrubber-fitted vessels and to some land users such as power plants. It is a thick residual oil of RMG 380 grade or similar, and is cheaper than low sulphur fuel. Its market share fell sharply after 2020 but recovered in some ports as scrubber numbers grew.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛شیمی
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
The bottom product of vacuum distillation or visbreaking is blended with cutter stock (distillate) to reach the target viscosity. No desulphurisation of the residue is done in most cases.
▶How it works
Residual fuel must be heated to about 130 to 150 C to be injected into a marine diesel engine, with viscosity around 10 to 15 mm2/s at the injectors. Sulphur oxides in exhaust are removed by a scrubber that sprays water or caustic.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Fujairah sells HSFO to ships fitted with scrubbers, and Gulf refineries produce high-sulphur residue that can be sold as HSFO. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.
مولکولهای کلیدی
استانداردها و مشخصات
| ISO 8217 | Residual grades such as RMG 380: viscosity 380 mm2/s max at 50 C, flash point 60 C min. |
|---|---|
| MARPOL Annex VI Reg. 14 | 3.50% global limit until 2019 and 0.50% from 1 January 2020 (IMO); fuel above 0.50% may be burned only with an approved exhaust gas cleaning system. |
| IMO exhaust gas cleaning system guidelines (MEPC.259(68)) | Guidelines for scrubbers on ships. |
خطرات
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
نحوهٔ معامله
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts HSFO 380 assessments at Fujairah, Singapore, Rotterdam
Typical cargo
Barge deliveries; tanker loads up to 80,000 mt
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
HSFO usually trades at a discount to VLSFO; the spread drives scrubber economics.
پالایشگاههایی که آن را تولید میکنند: پیشنهاد ما
121 پالایشگاه فهرستشده این محصول را تولید میکنند که 40 تا از آنها در خلیج فارس، ایران و عراق است. پالایشگاههای خلیج فارس را اول میآوریم، سپس واحدهای در حال بهرهبرداری، و بعد بر اساس ظرفیت.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionدسترسی به صادرات
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingدسترسی به صادرات
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionدسترسی به صادرات
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionدسترسی به صادرات
- 5SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingدسترسی به صادرات
- 6YASREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingDeep conversionدسترسی به صادرات
ترمینالهایی که آن را جابهجا میکنند
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
میدانستید؟
💡 Before 2020 the global limit was 3.50 percent sulphur.
💡 Carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO).
خودتان را در مورد HSFO 3.5% (High Sulphur Fuel Oil) بسنجید
What was the pre-2020 global marine sulphur limit?
موارد بیشتر در این گروه
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
منابع
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Port of Fujairah (Wikipedia)
- Fujairah (Wikipedia)
با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق میکند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.






