Heavy fuels
Residual Fuel Oil (RFO / MFO)
Residual fuel oil is what remains after lighter products are distilled from crude. It is thick, dense and sulphur-rich, and it is burned in ships, boilers and power plants.
← همهٔ محصولاتنامهای دیگر: Mazut, MFO, Marine fuel oil, Fuel oil No. 6, Bunker C, Black oil
- نقطهٔ اشتعالMin 60 C typical (Wikipedia: about 65 C for No. 6)
- چگالی950 to 1030 kg/m³
- گرانروی50 to 700 mm2/s at 50 C
- جریان در سرماUp to 30 C
- گوگرد0.5 to 4% typical
- خطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


منبع تصاویر نمونههای شیشهای آزمایشگاهی از روی عکسهای مرجع در ویکیمدیا کامنز ساخته شدهاند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.
مایع را هم بزنید تا غلظت آن را حس کنید
ماوس یا انگشت را روی مایع حرکت دهید. برای همزدن شدیدتر، فشار دهید و بکشید. صفحهکلید: کلیدهای جهتدار هم میزنند و Space تکان میدهد.
بسیار غلیظ بسیار سنگین. بهسختی حرکت میکند و بهکندی برمیگردد.
گرانروی معمول بر اساس دادهها50 to 700 mm2/s at 50 C
- سرعت همزدن
- 0 px/s
- حرکت مایع
- 0%
- آرامگرفتن پس از
- -
- سطح
- ساکن
این رده فقط راهنمای حس مایع است. عدد گرانروی نمایشدادهشده همان است که در دادههای مشخصات آمده.
ظاهر محصول
Black, tarry
کاربردها
- Ship fuel
- Power plant fuel
- Industrial boilers
- Cement kilns
جابهجایی و ایمنی
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
ویژگیهای معمول
- ظاهر
- Black, tarry
- چگالی در 15 °C
- 950 to 1030 kg/m³
- نقطهٔ اشتعال
- Min 60 C typical (Wikipedia: about 65 C for No. 6)
- گرانروی
- 50 to 700 mm2/s at 50 C
- نقطهٔ ریزش
- Up to 30 C
- گوگرد معمول
- 0.5 to 4% typical
◉What it is
Residual fuel oil is the heaviest liquid product of a refinery. It is the vacuum residue or atmospheric residue, usually blended with a lighter cutter stock to adjust viscosity. In the US it is fuel oil No. 6 or Bunker C; in Russia and Central Asia it is called mazut; in power industries it may be called MFO (marine fuel oil or mazut fuel oil). Density is about 0.95 to 1.03 g/cm3 (Wikipedia). It must be heated to flow: No. 6 needs preheating to about 104 to 127 C (Wikipedia). The fuel is cheap but polluting.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛شیمی
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
Vacuum distillation leaves vacuum residue, which can be visbroken to cut viscosity. The result is diluted with distillates.
▶How it works
Heated, filtered and atomised to burn in boilers and slow engines.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf refineries produce fuel oil and Fujairah stores and blends it. Central Asia uses mazut for power and heating. Volumes are not stated.
مولکولهای کلیدی
استانداردها و مشخصات
| ISO 8217 | Marine residual grades |
|---|---|
| ASTM D396 | US fuel oil grades including No. 5 and No. 6 |
| GOST 10585 | Russian mazut specification |
خطرات
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
نحوهٔ معامله
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.4 to 6.6 bbl per mt.
Benchmarks
Platts FOB Arab Gulf HSFO 380 and fuel oil 180 assessments
Typical cargo
Tanker parcels 20,000 to 80,000 mt
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Often sold by cargo, with large volumes from Gulf refineries.
پالایشگاههایی که آن را تولید میکنند: پیشنهاد ما
91 پالایشگاه فهرستشده این محصول را تولید میکنند که 21 تا از آنها در خلیج فارس، ایران و عراق است. پالایشگاههای خلیج فارس را اول میآوریم، سپس واحدهای در حال بهرهبرداری، و بعد بر اساس ظرفیت.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionدسترسی به صادرات
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingدسترسی به صادرات
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionدسترسی به صادرات
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingدسترسی به صادرات
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingدسترسی به صادرات
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionدسترسی به صادرات
ترمینالهایی که آن را جابهجا میکنند
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
میدانستید؟
💡 No. 6 oil is also called Bunker C and needs preheating to about 104 to 127 C (Wikipedia).
💡 Residual fuel oil often has a density close to that of water, from about 0.95 to 1.03 g/cm3.
خودتان را در مورد Residual Fuel Oil (RFO / MFO) بسنجید
What is mazut?
موارد بیشتر در این گروه
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
منابع
با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق میکند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.






