پرش به محتوا

Heavy fuels

VLSFO 0.5% (Very Low Sulphur Fuel Oil)

VLSFO is marine fuel with sulphur of 0.50 percent or less, created for the IMO 2020 global cap. It is now the main bunker fuel for ocean-going ships.

← همهٔ محصولاتنام‌های دیگر: VLSFO, 0.5% sulphur fuel oil, IMO 2020 fuel, Compliant fuel

  • نقطهٔ اشتعالMin 60 C
  • چگالی900 to 991 kg/m³
  • گرانروی30 to 380 mm2/s at 50 C depending on blend
  • جریان در سرماVaries by blend; many are above 0 C and up to 30 C
  • گوگردMax 0.50% m/m (typically 0.40 to 0.50%)
  • خطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ VLSFO 0.5% (Very Low Sulphur Fuel Oil) در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از VLSFO 0.5% (Very Low Sulphur Fuel Oil) در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی VLSFO 0.5% (Very Low Sulphur Fuel Oil) در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.

VLSFO 0.5% (Very Low Sulphur Fuel Oil) در دمای عادی جامد است، بنابراین مایعی برای هم‌زدن وجود ندارد. 30 to 380 mm2/s at 50 C depending on blend

ظاهر محصول

Dark brown to black, opaque, and viscous like treacle at room temperature. It must be heated to pump. Appearance is not a quality test: a good and a bad VLSFO look the same, which is why laboratory results matter.

کاربردها

  • Deep-sea vessels without scrubbers
  • Container ships and tankers

جابه‌جایی و ایمنی

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

ویژگی‌های معمول

ظاهر
Black, may be waxy
چگالی در 15 °C
900 to 991 kg/m³
نقطهٔ اشتعال
Min 60 C
گرانروی
30 to 380 mm2/s at 50 C depending on blend
نقطهٔ ریزش
Varies by blend; many are above 0 C and up to 30 C
گوگرد معمول
Max 0.50% m/m (typically 0.40 to 0.50%)

◉What it is

VLSFO is a blend of residual and distillate components that meets the 0.50 percent global sulphur limit that took effect on 1 January 2020. Ships without scrubbers must use VLSFO or a more expensive distillate. The composition varies by supplier: some blends are waxy, some are aromatic, and some contain cracked material. That variety makes compatibility checking important. Many VLSFO grades meet ISO 8217 RMG 380 or RME 180 viscosity limits, but the parameters differ from the traditional high-sulphur fuel.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛شیمی

VLSFO blends are made from low-sulphur residues, hydrocracker bottoms and distillates. Paraffinic blends can precipitate wax at low temperature, while aromatic blends have better stability but higher density. Low sulphur means fewer sulphur-containing heteroatoms but not necessarily better stability.

⚙How it is made

Low sulphur residue from refining low sulphur crudes or hydrotreating residues is blended with distillate or cracked streams to meet viscosity and sulphur limits.

▶How it works

Heated as other residual fuels. Some blends need extra heating to avoid wax, and mixing batches can cause sludge. Combustion quality (CCAI or CII) varies.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

VLSFO is a main bunker fuel sold at Fujairah. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

ISO 8217Residual grades such as RMG 380 or RME 180; sulphur is set by MARPOL, not by the viscosity grade.
MARPOL Annex VI Reg. 140.50% global sulphur limit from 1 January 2020 (IMO).

خطرات

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.کلاس Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

نحوهٔ معامله

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts VLSFO assessments at Fujairah, Singapore, Rotterdam, Houston

Typical cargo

Barge or bunker tanker deliveries of 500 to 5,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

VLSFO is quoted per mt; prices track low sulphur residue and gasoil.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

121 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 40 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 121 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 VLSFO is not a single product: each supplier blends it differently.

💡 The 0.50 percent global limit applied from 1 January 2020 (IMO).

خودتان را در مورد VLSFO 0.5% (Very Low Sulphur Fuel Oil) بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What is the VLSFO sulphur limit?

دیدن صفحهٔ مشخصات PST

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.