پرش به محتوا

Heavy fuels

IFO 380 and IFO 180

IFO 380 and IFO 180 are intermediate fuel oils named for their maximum viscosity in mm2/s at 50 C. They are blends of residual oil with some distillate.

← همهٔ محصولاتنام‌های دیگر: Intermediate Fuel Oil 380, Intermediate Fuel Oil 180, RMG 380, RME 180, IFO

  • نقطهٔ اشتعالMin 60 C
  • چگالی960 to 991 kg/m³
  • گرانرویMax 180 or 380 mm2/s at 50 C
  • جریان در سرماMax 30 C
  • گوگردDepends on type: HS up to 3.5%; VLS up to 0.50%
  • خطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ IFO 380 and IFO 180 در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از IFO 380 and IFO 180 در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی IFO 380 and IFO 180 در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.

مایع را هم بزنید تا غلظت آن را حس کنید

ماوس یا انگشت را روی مایع حرکت دهید. برای هم‌زدن شدیدتر، فشار دهید و بکشید. صفحه‌کلید: کلیدهای جهت‌دار هم می‌زنند و Space تکان می‌دهد.

بسیار غلیظ
رنگ بر اساس رنگ معمول IFO 380 and IFO 180 است.
رقیق و روانغلیظ و سنگین

بسیار غلیظ بسیار سنگین. به‌سختی حرکت می‌کند و به‌کندی برمی‌گردد.

گرانروی معمول بر اساس داده‌هاMax 180 or 380 mm2/s at 50 C

سرعت هم‌زدن
0 px/s
حرکت مایع
0%
آرام‌گرفتن پس از
-
سطح
ساکن

این رده فقط راهنمای حس مایع است. عدد گرانروی نمایش‌داده‌شده همان است که در داده‌های مشخصات آمده.

ظاهر محصول

Black, viscous

کاربردها

  • Ships with slow and medium speed diesel engines
  • Power stations

جابه‌جایی و ایمنی

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

ویژگی‌های معمول

ظاهر
Black, viscous
چگالی در 15 °C
960 to 991 kg/m³
نقطهٔ اشتعال
Min 60 C
گرانروی
Max 180 or 380 mm2/s at 50 C
نقطهٔ ریزش
Max 30 C
گوگرد معمول
Depends on type: HS up to 3.5%; VLS up to 0.50%

◉What it is

Intermediate fuel oil is a marine residual fuel blend. The numbers refer to viscosity in centistokes at 50 C: 380 or 180. According to Wikipedia, IFO 380 is about 98 percent residual oil with 2 percent distillate, while IFO 180 is about 88 percent residual and 12 percent distillate. In ISO 8217 terms IFO 380 corresponds to RMG 380 and IFO 180 to RME 180. They were the main ship fuels before IMO 2020 and are still sold in high and low sulphur forms.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛شیمی

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

Vacuum residue or visbreaker residue is diluted with cutter stock or light cycle oil to reach 180 or 380 viscosity.

▶How it works

The fuel is heated to about 130 C or more for injection. The 380 grade is usually cheaper per tonne than 180 because it needs less of the more expensive distillate cutter to reach its viscosity.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

IFO 380 in high-sulphur and 0.50 percent forms is sold at Fujairah. Gulf refineries produce the residual component. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

ISO 8217RME 180 and RMG 380 grades: density 991 kg/m3 max, viscosity 180 or 380 mm2/s max at 50 C, flash point 60 C min.
MARPOL Annex VISulphur limits.

خطرات

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.کلاس Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

نحوهٔ معامله

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts 380 CST HSFO and 180 CST assessments

Typical cargo

Bunker barge or tanker

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

380 is the global benchmark viscosity.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

91 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 21 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 91 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 The numbers are viscosity in mm2/s at 50 C, not density.

💡 The 50 C test temperature is used because heavy fuel is too thick to measure conveniently at 40 C.

خودتان را در مورد IFO 380 and IFO 180 بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What does 380 mean in IFO 380?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.