پرش به محتوا

Heavy fuels

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

ULSFO is a residual or blended fuel with sulphur at or below 0.10 percent. It is used in emission control areas in place of distillate fuel.

← همهٔ محصولاتنام‌های دیگر: ULSFO, 0.1% sulphur fuel oil, ECA fuel oil

  • نقطهٔ اشتعالMin 60 C
  • چگالی860 to 950 kg/m³
  • گرانروی10 to 180 mm2/s at 50 C typical
  • گوگردMax 0.10% m/m
  • خطرUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) در دمای عادی جامد است، بنابراین مایعی برای هم‌زدن وجود ندارد. 10 to 180 mm2/s at 50 C typical

ظاهر محصول

Dark to black

کاربردها

  • ECA fuel for ships without scrubbers
  • Alternative to LSMGO

جابه‌جایی و ایمنی

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

ویژگی‌های معمول

ظاهر
Dark to black
چگالی در 15 °C
860 to 950 kg/m³
نقطهٔ اشتعال
Min 60 C
گرانروی
10 to 180 mm2/s at 50 C typical
نقطهٔ ریزش
Varies by blend
گوگرد معمول
Max 0.10% m/m

◉What it is

ULSFO is a marine fuel designed to meet the 0.10 percent sulphur cap in ECAs without being a pure distillate. It is made from low sulphur components and is usually cheaper than LSMGO. Because the limit is so low, producing it from residue is challenging. It is not a formal ISO 8217 grade: it usually sits in the DMB or RMD/RME families with 0.10% sulphur. Supply is limited, and many ships simply use LSMGO.

⬡What it is made of

C15 to C50 mixture, mostly paraffinic and hydrotreated.

⚛شیمی

ULSFO is made by blending highly hydrotreated components, so it contains fewer aromatic and sulphur-bearing molecules than other residual fuels. The low sulphur level is the result of hydrodesulphurisation, which converts sulphur in organic molecules to H2S that is removed.

⚙How it is made

Hydrotreated residue, hydrocracker bottoms and distillate are blended; supply depends on the refinery.

▶How it works

Heated as a residual fuel. Low sulphur reduces acid corrosion but also cylinder oil cold corrosion if the engine uses high BN oil.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf demand is limited because there is no Gulf ECA, but ships heading to ECAs can buy low-sulphur fuels at Fujairah. ULSFO availability there is not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

MARPOL Annex VI Reg. 140.10% sulphur limit in ECAs from 1 January 2015 (IMO).
ISO 8217The applicable grade depends on viscosity; ULSFO is not a separate ISO grade.

خطرات

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.کلاس Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

نحوهٔ معامله

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts ULSFO assessments (Singapore, Rotterdam, Fujairah)

Typical cargo

Barge deliveries

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

Not widely traded; priced between LSMGO and VLSFO.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

121 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 40 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 121 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 ULSFO volumes are small compared with VLSFO.

💡 The 0.10 percent ECA limit has applied since 1 January 2015 (IMO).

خودتان را در مورد ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What sulphur does ULSFO have?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.