Passare al contenuto

Heavy fuels

HSFO 3.5% (High Sulphur Fuel Oil)

HSFO is residual marine fuel with up to 3.5 percent sulphur. After IMO 2020 it can be burned only by ships fitted with exhaust gas scrubbers.

← Tutti i prodottiDetto anche: HSFO, High sulphur fuel oil, 3.5% sulphur fuel oil, RMG 380 3.5%

  • Punto di infiammabilitàMin 60 C
  • Densità960 to 991 kg/m³
  • ViscositàUp to 380 mm2/s at 50 C (RMG 380)
  • Flusso a freddoMax 30 C (ISO 8217 RMG)
  • ZolfoUp to 3.50% m/m (typically 2.5 to 3.5%)
  • PericoloUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di HSFO 3.5% (High Sulphur Fuel Oil), nel suo colore tipico
Un campione di HSFO 3.5% (High Sulphur Fuel Oil) in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Fotografia di riferimento
Come HSFO 3.5% (High Sulphur Fuel Oil) viene stoccato e movimentato nella pratica.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.

HSFO 3.5% (High Sulphur Fuel Oil) è solido a temperatura ambiente, quindi non c'è liquido da agitare. Up to 380 mm2/s at 50 C (RMG 380)

Aspetto

Black, opaque and very viscous. It must be heated to flow. As with all residual fuels, colour says nothing about quality.

Dove si usa

  • Ships with scrubbers
  • Power plants and some industry

Manipolazione e sicurezza

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Proprietà tipiche

Aspetto
Black, opaque, viscous
Densità a 15 °C
960 to 991 kg/m³
Punto di infiammabilità
Min 60 C
Viscosità
Up to 380 mm2/s at 50 C (RMG 380)
Punto di scorrimento
Max 30 C (ISO 8217 RMG)
Zolfo tipico
Up to 3.50% m/m (typically 2.5 to 3.5%)

◉What it is

HSFO was the main ship fuel before 2020, when the global limit for sulphur in marine fuel was 3.50 percent. The IMO cut the global cap to 0.50 percent from 1 January 2020, and carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO). Today HSFO is sold to scrubber-fitted vessels and to some land users such as power plants. It is a thick residual oil of RMG 380 grade or similar, and is cheaper than low sulphur fuel. Its market share fell sharply after 2020 but recovered in some ports as scrubber numbers grew.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛La chimica

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

The bottom product of vacuum distillation or visbreaking is blended with cutter stock (distillate) to reach the target viscosity. No desulphurisation of the residue is done in most cases.

▶How it works

Residual fuel must be heated to about 130 to 150 C to be injected into a marine diesel engine, with viscosity around 10 to 15 mm2/s at the injectors. Sulphur oxides in exhaust are removed by a scrubber that sprays water or caustic.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Fujairah sells HSFO to ships fitted with scrubbers, and Gulf refineries produce high-sulphur residue that can be sold as HSFO. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

Molecole chiave

Norme e specifiche

ISO 8217Residual grades such as RMG 380: viscosity 380 mm2/s max at 50 C, flash point 60 C min.
MARPOL Annex VI Reg. 143.50% global limit until 2019 and 0.50% from 1 January 2020 (IMO); fuel above 0.50% may be burned only with an approved exhaust gas cleaning system.
IMO exhaust gas cleaning system guidelines (MEPC.259(68))Guidelines for scrubbers on ships.

Pericoli

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Classe Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Come si commercializza

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts HSFO 380 assessments at Fujairah, Singapore, Rotterdam

Typical cargo

Barge deliveries; tanker loads up to 80,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

HSFO usually trades at a discount to VLSFO; the spread drives scrubber economics.

Raffinerie che lo producono: i nostri suggerimenti

121 raffinerie censite producono questo prodotto, 40 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.

Vedere tutti i 121 sulla mappa

Terminal che lo movimentano

Lo sapeva?

💡 Before 2020 the global limit was 3.50 percent sulphur.

💡 Carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO).

Si metta alla prova su HSFO 3.5% (High Sulphur Fuel Oil)

Domanda 1 di 3 · Punteggio 0 · Serie 0

What was the pre-2020 global marine sulphur limit?

Vedere la pagina delle specifiche PST

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.